public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures
@ 2010-01-16 20:28 Jens Scharsig
  2010-01-17 17:34 ` Tom
  2010-01-17 17:48 ` Jens Scharsig
  0 siblings, 2 replies; 6+ messages in thread
From: Jens Scharsig @ 2010-01-16 20:28 UTC (permalink / raw)
  To: u-boot

* prepare board config files for Soc access update

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
---
 include/configs/afeb9260.h         |    4 ++
 include/configs/at91cap9adk.h      |    4 ++
 include/configs/at91rm9200dk.h     |   13 ++++-
 include/configs/at91rm9200ek.h     |   11 ++++-
 include/configs/at91sam9260ek.h    |    5 ++
 include/configs/at91sam9261ek.h    |    5 ++
 include/configs/at91sam9263ek.h    |   83 ++++++++++++++++++------------------
 include/configs/at91sam9m10g45ek.h |    6 +++
 include/configs/at91sam9rlek.h     |    5 ++
 include/configs/cmc_pu2.h          |   10 ++++-
 include/configs/cpu9260.h          |    4 ++
 include/configs/cpuat91.h          |    2 +
 include/configs/csb637.h           |   10 ++++-
 include/configs/kb9202.h           |   10 ++++-
 include/configs/m501sk.h           |   11 ++++-
 include/configs/meesc.h            |    5 ++
 include/configs/mp2usb.h           |   10 ++++-
 include/configs/pm9261.h           |    7 +++
 include/configs/pm9263.h           |    5 ++
 include/configs/sbc35_a9g20.h      |    4 ++
 include/configs/tny_a9260.h        |    4 ++
 21 files changed, 166 insertions(+), 52 deletions(-)

diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 58b8c8c..ddd5f52 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		18429952	/* from 18.432 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -45,6 +47,7 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -107,6 +110,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index 322718f..7679a09 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		12000000	/* 12 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -47,6 +49,7 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -131,6 +134,7 @@
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 590c69a..7480e25 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -25,6 +25,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
 #define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
@@ -113,8 +115,6 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 
-#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
-
 #define CONFIG_NR_DRAM_BANKS 1
 #define PHYS_SDRAM 0x20000000
 #define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
@@ -122,7 +122,14 @@
 #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
+
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index b4f075e..5b4175f 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 /*
  * from 18.432 MHz crystal
@@ -135,7 +137,6 @@
 #undef CONFIG_CMD_MISC
 #undef CONFIG_CMD_LOADS
 
-#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
 /* Options for MMC/SD Card */
 #define CONFIG_DOS_PARTITION	1
 #undef CONFIG_MMC
@@ -145,7 +146,13 @@
 /*
  * Network Driver Setting
  */
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 0509011..4c3b0a2 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -52,6 +54,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -123,6 +127,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index fbf7389..066f256 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -50,6 +52,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -133,6 +137,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC15
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 571351c..68e8310 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -49,6 +49,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -69,9 +71,9 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIN_PB7	/* this is the power led */
-#define	CONFIG_GREEN_LED	AT91_PIN_PB8	/* this is the user1 led */
-#define	CONFIG_YELLOW_LED	AT91_PIN_PC29	/* this is the user2 led */
+#define	CONFIG_RED_LED		AT91_PORTPIN(B, 7)	/* the power led */
+#define	CONFIG_GREEN_LED	AT91_PORTPIN(B, 8)	/* the user1 led */
+#define	CONFIG_YELLOW_LED	AT91_PORTPIN(C, 29)	/* the user2 led */
 
 #define CONFIG_BOOTDELAY	3
 
@@ -147,39 +149,36 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define MASTER_PLL_MUL		171
 #define MASTER_PLL_DIV		14
+#define MASTER_PLL_OUT		3
 
 /* clocks */
 #define CONFIG_SYS_MOR_VAL						\
-		(AT91_PMC_MOSCEN |					\
-		 (255 << 8))		/* Main Oscillator Start-up Time */
-#define CONFIG_SYS_PLLAR_VAL						\
-		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
-		 AT91_PMC_OUT |						\
-		 AT91_PMC_PLLCOUNT |	/* PLL Counter */		\
-		 (2 << 28) |		/* PLL Clock Frequency Range */	\
-		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+		(AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
+#define CONFIG_SYS_PLLAR_VAL					\
+	(AT91_PMC_PLLAR_29 |					\
+	AT91_PMC_PLLxR_OUT(MASTER_PLL_OUT) |			\
+	AT91_PMC_PLLxR_PLLCOUNT(63) |				\
+	AT91_PMC_PLLxR_MUL(MASTER_PLL_MUL - 1) | 		\
+	AT91_PMC_PLLxR_DIV(MASTER_PLL_DIV))
 
 /* PCK/2 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR1_VAL		\
-		(AT91_PMC_CSS_SLOW |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
+	(AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 |	\
+	 AT91_PMC_MCKR_MDIV_2)
+
 /* PCK/2 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR2_VAL		\
-		(AT91_PMC_CSS_PLLA |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
+	(AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | 	\
+	AT91_PMC_MCKR_MDIV_2)
 
 /* define PDC[31:16] as DATA[31:16] */
 #define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
 /* no pull-up for D[31:16] */
 #define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
-#define CONFIG_SYS_MATRIX_EBI0CSA_VAL					\
-	(AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |	\
-	 AT91_MATRIX_EBI0_CS1A_SDRAMC)
+#define CONFIG_SYS_MATRIX_EBICSA_VAL					\
+	(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V |	\
+	 AT91_MATRIX_CSA_EBI_CS1A)
 
 /* SDRAM */
 /* SDRAMC_MR Mode register */
@@ -221,33 +220,32 @@
 #define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */
 
 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
-#define CONFIG_SYS_SMC0_SETUP0_VAL					\
-		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
-		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
-#define CONFIG_SYS_SMC0_PULSE0_VAL					\
-		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
-		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+#define CONFIG_SYS_SMC0_SETUP0_VAL				\
+	(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) |	\
+	 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL				\
+	(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) |	\
+	 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
 #define CONFIG_SYS_SMC0_CYCLE0_VAL	\
-		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+	(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
 #define CONFIG_SYS_SMC0_MODE0_VAL				\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(6))
+	(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |		\
+	 AT91_SMC_MODE_DBW_16 |					\
+	 AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
 
 /* user reset enable */
 #define CONFIG_SYS_RSTC_RMR_VAL			\
 		(AT91_RSTC_KEY |		\
-		AT91_RSTC_PROCRST |		\
-		AT91_RSTC_RSTTYP_WAKEUP |	\
-		AT91_RSTC_RSTTYP_WATCHDOG)
+		AT91_RSTC_MR_URSTEN |		\
+		AT91_RSTC_MR_ERSTL(15))
 
 /* Disable Watchdog */
 #define CONFIG_SYS_WDTC_WDMR_VAL				\
-		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
-		 AT91_WDT_WDV |					\
-		 AT91_WDT_WDDIS |				\
-		 AT91_WDT_WDD)
+		(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT |	\
+		 AT91_WDT_MR_WDV(0xfff) |			\
+		 AT91_WDT_MR_WDDIS |				\
+		 AT91_WDT_MR_WDD(0xfff))
+
 #endif
 
 #else
@@ -264,9 +262,10 @@
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PORTPIN(D, 15)
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PORTPIN(A, 22)
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 06184e7..cc1bf9a 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		12000000	/* from 12 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -50,6 +52,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -118,6 +122,7 @@
 /* NOR flash, if populated */
 #ifndef CONFIG_CMD_NAND
 #define CONFIG_SYS_NO_FLASH		1
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #else
 #define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER		1
@@ -141,6 +146,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 6fad75d..62e760f 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK		12000000	/* 12 MHz crystal */
 #define CONFIG_SYS_HZ		1000
@@ -47,6 +49,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -119,6 +123,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PB6
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PD17
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet - not present */
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index be478b2..ffe83f0 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -25,6 +25,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */
@@ -152,7 +154,13 @@
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 4ef8566..50e31ff 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -31,6 +31,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 #define CONFIG_DISPLAY_CPUINFO	1
 
 #define AT91_MAIN_CLOCK		18432000
@@ -242,6 +244,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 8746f70..9f0ac03 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 #ifdef CONFIG_CPUAT91_RAM
 #define CONFIG_SKIP_LOWLEVEL_INIT	1
 #define CONFIG_SKIP_RELOCATE_UBOOT	1
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index f4fd808..efa2780 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	184320000	/* from 3.6864 MHz crystal (3686400 * 50) */
 #define AT91C_MASTER_CLOCK	46080000	/* (AT91C_MAIN_CLOCK/4)	peripheral clock */
@@ -126,7 +128,13 @@
 #define CONFIG_SYS_ALT_MEMTEST			1
 #define CONFIG_SYS_MEMTEST_SCRATCH		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 4
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 #undef CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
index 7dd81e6..41ec1d5 100644
--- a/include/configs/kb9202.h
+++ b/include/configs/kb9202.h
@@ -29,6 +29,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	180000000	/* from 10 MHz crystal */
 #define AT91C_MASTER_CLOCK	60000000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
@@ -115,7 +117,13 @@
 #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024)
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 
 #define CONFIG_SYS_FLASH_BASE			0x10000000
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
index 5c06642..26c2bcb 100644
--- a/include/configs/m501sk.h
+++ b/include/configs/m501sk.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
 #define AT91C_MAIN_CLOCK	179712000
@@ -34,6 +36,7 @@
 #define AT91C_MASTER_CLOCK	59904000
 #define AT91_SLOW_CLOCK	32768 /* slow clock */
 
+#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
 #define CONFIG_AT91RM9200DK	1 /* on an AT91RM9200DK Board    */
 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
 #define CONFIG_CMDLINE_TAG	1 /* enable passing of ATAGs    */
@@ -166,7 +169,13 @@
 /* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
 #define CONFIG_SYS_MEMTEST_END	0x00100000
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT	20
 #define CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index ab5cbca..621b606 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -31,6 +31,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* Common stuff */
 #define CONFIG_SYS_HZ			1000	/* decrementer freq */
 #define CONFIG_MEESC			1	/* Board is esd MEESC */
@@ -56,6 +58,8 @@
  */
 
 /* Console output */
+#define CONFIG_AT91_GPIO			1
+
 #define CONFIG_ATMEL_USART			1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -121,6 +125,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 0c2ee60..3138b49 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 45) */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */
@@ -181,7 +183,13 @@
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI		1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
 #define CONFIG_NET_RETRY_COUNT		20
 #undef CONFIG_AT91C_USE_RMII
 
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 399d15f..65bc920 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91_CPU_NAME		"AT91SAM9261"
 
@@ -157,6 +159,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -236,6 +240,9 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA16
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
+
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER			1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 0af1280..b44c713 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -171,6 +173,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -259,6 +263,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PB30
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 #define CONFIG_CMD_JFFS2		1
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index f4b3477..3f0723f 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 #if defined(CONFIG_SBC35_A9G20_NANDFLASH) || defined(CONFIG_SBC35_A9G20_EEPROM)
 #define CONFIG_SBC35_A9G20
 #endif
@@ -57,6 +59,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART0
 #undef CONFIG_USART1
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index 4ad081b..466d27b 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -30,6 +30,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 #if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9260_EEPROM)
 #define CONFIG_TNY_A9260
 #elif defined(CONFIG_TNY_A9G20_NANDFLASH) || defined(CONFIG_TNY_A9G20_EEPROM)
@@ -66,6 +68,8 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO	1
+
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
-- 
1.6.0.2

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures
  2010-01-16 20:28 [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures Jens Scharsig
@ 2010-01-17 17:34 ` Tom
  2010-01-17 17:48 ` Jens Scharsig
  1 sibling, 0 replies; 6+ messages in thread
From: Tom @ 2010-01-17 17:34 UTC (permalink / raw)
  To: u-boot

Jens Scharsig wrote:
> * prepare board config files for Soc access update
> 

This review was cut short.
The review of this and patch #2 are fairly complete.

run kernel checkpatch.pl against the patches you submit.
In general errors must be fixed.
Warnings should be fixed, if appropriate.

There should also be no warnings/errors when git -am is used
on the patches.

The names of the patches should match what the patch is doing
Every patch is named the same but there is much more going
on in this patch set than just that.  It may be appropriate
to split this patchset up.

This patch is not bisectable.
There are config setting changes that do not happen until
later in the patch set.  It would seem like the first patch
would only set the CONFIG_LEGACY_AT91.  Mixed in are config
setting for gpio, nand, led and eth.

For large structural changes, the changes must be described
in detail in the commit log.

<snip>

> 
> diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
> index 58b8c8c..ddd5f52 100644
> --- a/include/configs/afeb9260.h
> +++ b/include/configs/afeb9260.h
> @@ -26,6 +26,8 @@
>  #ifndef __CONFIG_H
>  #define __CONFIG_H
>  
> +#define CONFIG_AT91_LEGACY
> +

The meaning of this should be described in detail in the
commit log. so other at91 developers can understand
how to migrate or what happened to their board

>  /* ARM asynchronous clock */
>  #define AT91_MAIN_CLOCK		18429952	/* from 18.432 MHz crystal */
>  #define CONFIG_SYS_HZ		1000
> @@ -45,6 +47,7 @@
>  /*
>   * Hardware drivers
>   */
> +#define CONFIG_AT91_GPIO	1

This is not used until patch 5/8 where new gpio functions are defined
Move this to that patch or later

>  #define CONFIG_ATMEL_USART	1
>  #undef CONFIG_USART0
>  #undef CONFIG_USART1
> @@ -107,6 +110,7 @@
>  #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
>  #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
>  
> +#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */

This is a fix for a nand warning.
It an ok fix but belongs in its own patch

>  #endif
>  

<snip>
>  #define PHYS_SDRAM 0x20000000
>  #define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
> @@ -122,7 +122,14 @@
>  #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
>  #define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
>  
> -#define CONFIG_DRIVER_ETHER

This is an ethernet change that doesn't
happen until patch 7

> +#define CONFIG_NET_MULTI		1
> +#ifdef CONFIG_NET_MULTI
> +#define CONFIG_DRIVER_AT91EMAC		1

<snip>
> +
>  #define CONFIG_ATMEL_USART	1
>  #undef CONFIG_USART0
>  #undef CONFIG_USART1
> @@ -69,9 +71,9 @@
>  
>  /* LED */
>  #define CONFIG_AT91_LED
> -#define	CONFIG_RED_LED		AT91_PIN_PB7	/* this is the power led */
> -#define	CONFIG_GREEN_LED	AT91_PIN_PB8	/* this is the user1 led */
> -#define	CONFIG_YELLOW_LED	AT91_PIN_PC29	/* this is the user2 led */
> +#define	CONFIG_RED_LED		AT91_PORTPIN(B, 7)	/* the power led */
> +#define	CONFIG_GREEN_LED	AT91_PORTPIN(B, 8)	/* the user1 led */
> +#define	CONFIG_YELLOW_LED	AT91_PORTPIN(C, 29)	/* the user2 led */
>  

AT91_PORTPIN is not defined until patch 5/8 - part 2/3

>  #define CONFIG_BOOTDELAY	3
>  
> @@ -147,39 +149,36 @@
>  #ifndef CONFIG_SKIP_LOWLEVEL_INIT
>  #define MASTER_PLL_MUL		171
>  #define MASTER_PLL_DIV		14
> +#define MASTER_PLL_OUT		3

Why is this needed ?


Tom

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures
  2010-01-16 20:28 [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures Jens Scharsig
  2010-01-17 17:34 ` Tom
@ 2010-01-17 17:48 ` Jens Scharsig
  2010-01-17 18:25   ` Tom
  1 sibling, 1 reply; 6+ messages in thread
From: Jens Scharsig @ 2010-01-17 17:48 UTC (permalink / raw)
  To: u-boot

Please look at

<http://lists.denx.de/pipermail/u-boot/2009-December/065688.html>

for Patchset details

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures
  2010-01-17 17:48 ` Jens Scharsig
@ 2010-01-17 18:25   ` Tom
  2010-01-17 19:02     ` Jens Scharsig
  2010-01-23 11:00     ` Jens Scharsig
  0 siblings, 2 replies; 6+ messages in thread
From: Tom @ 2010-01-17 18:25 UTC (permalink / raw)
  To: u-boot

Jens Scharsig wrote:
> Please look at
> 
> <http://lists.denx.de/pipermail/u-boot/2009-December/065688.html>
> 

<link included>

on request by Wolfgang, I have try to implement SoC access for AT91
arch with c structures. Additional I have add support for AT91RM9200
in at91 tree.
I need to switch to a different project for more than half a year.
So I think, it's time to publish the result.

What this Patch set do:

* add's the new temporary CONFIG_AT91_LEGACY to all board configs
   that not converted by this patch
* add's a warning to all files, that not converted by this patch
* add's the support for AT91RM9200 in at91 tree
* add's c stucture SoC defines
* convert all files cpu/../at91 to use c stucture SoC access
* move the at gpio access to a real driver
* add's at91_emac (AT91RM9200) network driver (NET_MULTI)
* add's a new board (eb_cpux9k2) which demonstrates, how to use
   boards with AT91RM9200 cpu in at91 arch tree
* convert following board: at91sam9263ek

</link included>

This is a concatenation of all the patches long commit logs.
It is a good starting point.  With a change of this size and
when it is expected for others to carry on the work, more detail
is needed.

It should be clear from the name of the patch, as appears in the subject
line or short commit log, what the patch is trying to do.  Then
all the changes related to that patch should be contained in that one
commit.

For example.  It is unclear without looking closely at the patch
that 7/8 is a network patch or 8/8 is a board patch.

By bisectable, i mean that early patches do not depend on later patches.
It should be possible to just apply patch 1 without applying any of
the other patch.

Patch 1 looks like is contains the union of all the config file changes.
What it should have contained was only 1 change adding CONFIG_AT91_LEGACY.
Fixing this will mean separating this changes into their logical parts
and rebasing the patchset to include then in the correct order.
This is a task best done as you develop instead of after the fact.  This is
why i recommended that it may be easier to break this patchset into multiple
pieces and submit them separately.

Tom

> for Patchset details
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures
  2010-01-17 18:25   ` Tom
@ 2010-01-17 19:02     ` Jens Scharsig
  2010-01-23 11:00     ` Jens Scharsig
  1 sibling, 0 replies; 6+ messages in thread
From: Jens Scharsig @ 2010-01-17 19:02 UTC (permalink / raw)
  To: u-boot

Am 2010-01-17 19:25, schrieb Tom:
> 
> By bisectable, i mean that early patches do not depend on later patches.
> It should be possible to just apply patch 1 without applying any of
> the other patch.
> 
This is my current problem. I underestimated the extent of the changes,
when I started. Secondly, I am not very familiar with git.
So I just tried to use individual commits for splitting the patch.

I will try rebase/restucture the patchset, but give me a lot of time.

Jens

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures
  2010-01-17 18:25   ` Tom
  2010-01-17 19:02     ` Jens Scharsig
@ 2010-01-23 11:00     ` Jens Scharsig
  1 sibling, 0 replies; 6+ messages in thread
From: Jens Scharsig @ 2010-01-23 11:00 UTC (permalink / raw)
  To: u-boot

Hello Tom,
> By bisectable, i mean that early patches do not depend on later patches.
> It should be possible to just apply patch 1 without applying any of
> the other patch.
> 
> Patch 1 looks like is contains the union of all the config file changes.
> What it should have contained was only 1 change adding CONFIG_AT91_LEGACY.
> Fixing this will mean separating this changes into their logical parts
> and rebasing the patchset to include then in the correct order.
> This is a task best done as you develop instead of after the fact.  This is
> why i recommended that it may be easier to break this patchset into multiple
> pieces and submit them separately.
> 

I have fully restructured the patch. I will send this as V3 within the
next hour.
The Parts are now only depended from 9 to 1, but independed from 1 to 9. 


regards

Jens

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-01-23 11:00 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-16 20:28 [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures Jens Scharsig
2010-01-17 17:34 ` Tom
2010-01-17 17:48 ` Jens Scharsig
2010-01-17 18:25   ` Tom
2010-01-17 19:02     ` Jens Scharsig
2010-01-23 11:00     ` Jens Scharsig

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox