From: Vipin KUMAR <vipin.kumar@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs
Date: Mon, 18 Jan 2010 10:09:17 +0530 [thread overview]
Message-ID: <4B53E5F5.6040403@st.com> (raw)
In-Reply-To: <4B536F4B.9080502@windriver.com>
On 1/18/2010 1:42 AM, Tom wrote:
> Vipin KUMAR wrote:
>> Hello Tom,
>>
>> Please consider the patchset version5 for mainline inclusion
>>
>> This patchset contains the version5 for SPEAr SoCs support
>> Modifications
>> 1. include/configs contins spear3xx.h for SPEAR300, SPEAR310 and SPEAr320
>> variants
>> 2. include/configs contins spear6xx.h for SPEAR600 and any variants in
>> future
>> 3. Added include/asm-arm/arch-spear/hardware.h for platform specific
>> defines eg. base addresses of devices
>> 4. review feedbacks on v4 patchset applied
>>
>> Thanks and Regards
>> Vipin
>>
>
> This looks good!
> Ack-ing the ARM parts.
>
> Outstanding are ack's from subsystem
> nand, usb and net.
Please see the following mails for usb and NAND acks
NAND subsystem
http://www.mail-archive.com/u-boot at lists.denx.de/msg26992.html
USB subsystem
http://www.mail-archive.com/u-boot at lists.denx.de/msg27163.html
Net subsystem is not supported as of now.
It would be added in the next merge window
The changes as suggested by Remy and Scott are already done in
patch set version5
> i2c has been acked
>
> Thanks for the hard work.
Welcome :)
> Tom
Regards
Vipin
>
>
>> Vipin (12):
>> SPEAr : Adding README.spear in doc
>> SPEAr : Adding basic SPEAr architecture support.
>> SPEAr : i2c driver support added for SPEAr SoCs
>> SPEAr : smi driver support for SPEAr SoCs
>> SPEAr : nand driver support for SPEAr SoCs
>> SPEAr : usbd driver support for SPEAr SoCs
>> SPEAr : Support added for SPEAr600 board
>> SPEAr : Support for HW mac id read/write from i2c mem
>> SPEAr : Support added for SPEAr300 board
>> SPEAr : emi controller initialization for CFI driver support
>> SPEAr : Support added for SPEAr310 board
>> SPEAr : Support added for SPEAr320 board
>
next prev parent reply other threads:[~2010-01-18 4:39 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-15 13:45 [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 01/12] SPEAr : Adding README.spear in doc Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 02/12] SPEAr : Adding basic SPEAr architecture support Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 03/12] SPEAr : i2c driver support added for SPEAr SoCs Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 04/12] SPEAr : smi driver support " Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 05/12] SPEAr : nand " Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 06/12] SPEAr : usbd " Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 07/12] SPEAr : Support added for SPEAr600 board Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 09/12] SPEAr : Support added for SPEAr300 board Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 10/12] SPEAr : emi controller initialization for CFI driver support Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 11/12] SPEAr : Support added for SPEAr310 board Vipin KUMAR
2010-01-15 13:45 ` [U-Boot] [PATCH v5 12/12] SPEAr : Support added for SPEAr320 board Vipin KUMAR
2010-01-18 6:15 ` [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem Ben Warren
2010-01-18 7:05 ` Vipin KUMAR
2010-01-18 7:19 ` Ben Warren
2010-01-18 7:24 ` Vipin KUMAR
2010-01-18 12:59 ` Tom
2010-01-18 7:08 ` Mike Frysinger
2010-02-01 5:15 ` Ben Warren
2010-02-01 13:55 ` Tom
2010-01-18 18:02 ` [U-Boot] [PATCH v5 05/12] SPEAr : nand driver support for SPEAr SoCs Scott Wood
2010-01-17 20:12 ` [U-Boot] [PATCH v5 00/12] Support " Tom
2010-01-18 4:39 ` Vipin KUMAR [this message]
2010-01-18 12:51 ` Tom
2010-01-18 19:19 ` Remy Bohmer
2010-01-19 11:52 ` Armando VISCONTI
2010-01-21 21:30 ` Tom
2010-01-22 3:33 ` Vipin KUMAR
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B53E5F5.6040403@st.com \
--to=vipin.kumar@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox