From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vipin KUMAR Date: Mon, 18 Jan 2010 10:09:17 +0530 Subject: [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs In-Reply-To: <4B536F4B.9080502@windriver.com> References: <1263563153-408-1-git-send-email-vipin.kumar@st.com> <4B536F4B.9080502@windriver.com> Message-ID: <4B53E5F5.6040403@st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 1/18/2010 1:42 AM, Tom wrote: > Vipin KUMAR wrote: >> Hello Tom, >> >> Please consider the patchset version5 for mainline inclusion >> >> This patchset contains the version5 for SPEAr SoCs support >> Modifications >> 1. include/configs contins spear3xx.h for SPEAR300, SPEAR310 and SPEAr320 >> variants >> 2. include/configs contins spear6xx.h for SPEAR600 and any variants in >> future >> 3. Added include/asm-arm/arch-spear/hardware.h for platform specific >> defines eg. base addresses of devices >> 4. review feedbacks on v4 patchset applied >> >> Thanks and Regards >> Vipin >> > > This looks good! > Ack-ing the ARM parts. > > Outstanding are ack's from subsystem > nand, usb and net. Please see the following mails for usb and NAND acks NAND subsystem http://www.mail-archive.com/u-boot at lists.denx.de/msg26992.html USB subsystem http://www.mail-archive.com/u-boot at lists.denx.de/msg27163.html Net subsystem is not supported as of now. It would be added in the next merge window The changes as suggested by Remy and Scott are already done in patch set version5 > i2c has been acked > > Thanks for the hard work. Welcome :) > Tom Regards Vipin > > >> Vipin (12): >> SPEAr : Adding README.spear in doc >> SPEAr : Adding basic SPEAr architecture support. >> SPEAr : i2c driver support added for SPEAr SoCs >> SPEAr : smi driver support for SPEAr SoCs >> SPEAr : nand driver support for SPEAr SoCs >> SPEAr : usbd driver support for SPEAr SoCs >> SPEAr : Support added for SPEAr600 board >> SPEAr : Support for HW mac id read/write from i2c mem >> SPEAr : Support added for SPEAr300 board >> SPEAr : emi controller initialization for CFI driver support >> SPEAr : Support added for SPEAr310 board >> SPEAr : Support added for SPEAr320 board >