[U-Boot] [PATCH v2] da830evm: Use table driven pin mux configuration

[U-Boot] [PATCH v2] da830evm: Use table driven pin mux configuration

[Nick Thompson]

Tidyup the pin muxer configuration using the Davinci table driven
pinmux configuration function and data tables.

Signed-off-by: Nick Thompson <nick.thompson@ge.com>
---
Applies to master

Changes:
	Rebased after USB patch

 board/davinci/da830evm/da830evm.c |   35 +++++++++++++++++------------------
 1 files changed, 17 insertions(+), 18 deletions(-)

diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c
index 7cf6013..12df1f8 100644
--- a/board/davinci/da830evm/da830evm.c
+++ b/board/davinci/da830evm/da830evm.c
@@ -42,34 +42,43 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define pinmux	&davinci_syscfg_regs->pinmux
 
-#ifdef CONFIG_SPI_FLASH
 /* SPI0 pin muxer settings */
-const struct pinmux_config spi0_pins[] = {
+static const struct pinmux_config spi0_pins[] = {
 	{ pinmux[7], 1, 3 },
 	{ pinmux[7], 1, 4 },
 	{ pinmux[7], 1, 5 },
 	{ pinmux[7], 1, 6 },
 	{ pinmux[7], 1, 7 }
 };
-#endif
 
 /* UART pin muxer settings */
-const struct pinmux_config uart_pins[] = {
+static const struct pinmux_config uart_pins[] = {
 	{ pinmux[8], 2, 7 },
 	{ pinmux[9], 2, 0 }
 };
 
 /* I2C pin muxer settings */
-const struct pinmux_config i2c_pins[] = {
+static const struct pinmux_config i2c_pins[] = {
 	{ pinmux[9], 2, 3 },
 	{ pinmux[9], 2, 4 }
 };
 
 /* USB0_DRVVBUS pin muxer settings */
-const struct pinmux_config usb_pins[] = {
+static const struct pinmux_config usb_pins[] = {
 	{ pinmux[9], 1, 1 }
 };
 
+static const struct pinmux_resource pinmuxes[] = {
+#ifdef CONFIG_SPI_FLASH
+	PINMUX_ITEM(spi0_pins),
+#endif
+	PINMUX_ITEM(uart_pins),
+	PINMUX_ITEM(i2c_pins),
+#ifdef CONFIG_USB_DA8XX
+	PINMUX_ITEM(usb_pins),
+#endif
+};
+
 int board_init(void)
 {
 #ifndef CONFIG_USE_IRQ
@@ -112,18 +121,8 @@ int board_init(void)
 		 DAVINCI_SYSCFG_SUSPSRC_UART2),
 	       &davinci_syscfg_regs->suspsrc);
 
-#ifdef CONFIG_SPI_FLASH
-	if (davinci_configure_pin_mux(spi0_pins, ARRAY_SIZE(spi0_pins)) != 0)
-		return 1;
-#endif
-
-	if (davinci_configure_pin_mux(uart_pins, ARRAY_SIZE(uart_pins)) != 0)
-		return 1;
-
-	if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0)
-		return 1;
-
-	if (davinci_configure_pin_mux(usb_pins, ARRAY_SIZE(usb_pins)) != 0)
+	/* configure pinmux settings */
+	if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
 		return 1;
 
 	/* enable the console UART */
-- 
1.6.3.3

[U-Boot] [PATCH v2] da830evm: Use table driven pin mux configuration

[Paulraj, Sandeep]

> 
> Tidyup the pin muxer configuration using the Davinci table driven
> pinmux configuration function and data tables.
> 
> Signed-off-by: Nick Thompson <nick.thompson@ge.com>
> ---
> Applies to master
> 
> Changes:
> 	Rebased after USB patch
> 
>  board/davinci/da830evm/da830evm.c |   35 +++++++++++++++++---------------
> ---


Pushed to u-boot-ti

Thanks,
Sandeep