[U-Boot] imx51 u-boot

[Stefano Babic <sbabic@denx.de>]

Rick Bronson wrote:
>   Not sure what patches these are or where to find them.  Also not
> sure what source to apply these patches to.  Is it the latest on
> denx.de or the ltib sources?  Not sure what rev of the processor I
> have, my bootup log is here http://www.efn.org/~rick/pub/imx51.log
> although  I don't see any T01, T02, etc printing.

You do not find at the moment mx51 support on the u-boot mainline. I
sent my patches to u-boot ML with the goal to integrate the processor in
 u-boot and the patches are currently under review. If you want to give
theses patches a try, you have to apply them to the current u-boot tree.

> 
>   I gues it would be nice if there were some instructions for getting
> up to date on the latest u-boot for the iMX51 eval board.  I'd be
> happy to help put together a set.

Your starting point could be looking at
http://www.denx.de/wiki/U-Boot/SourceCode.

However, as I said, patches for the imx51 eval kit are not yet integrated.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================