From: Tom <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] at91: Add esd gmbh OTC570 board support
Date: Sun, 31 Jan 2010 08:54:03 -0600 [thread overview]
Message-ID: <4B65998B.90705@windriver.com> (raw)
In-Reply-To: <1264413041705-git-send-email-Daniel.Gorsulowski@esd.eu>
Daniel Gorsulowski wrote:
> This patch adds support for esd gmbh OTC570 board.
> The OTC570 is based on an Atmel AT91SAM9263 SoC.
>
> Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
> ---
> v2: Applyed suggestions according to
> http://lists.denx.de/pipermail/u-boot/2010-January/066948.html
> - removed video commands they should go into common
> - swapped copyright places
> - removed some #ifdef / #ifndef
> - converted element initializations in panel_info
> - replaced some puts() with printf()
> - moved CONFIG_SYS_HZ below board and cpu defines
>
> MAINTAINERS | 1 +
> MAKEALL | 1 +
> Makefile | 3 +
> board/esd/otc570/Makefile | 55 +++++++
> board/esd/otc570/config.mk | 1 +
> board/esd/otc570/otc570.c | 365 ++++++++++++++++++++++++++++++++++++++++++
> board/esd/otc570/partition.c | 37 +++++
> include/configs/otc570.h | 246 ++++++++++++++++++++++++++++
> tools/Makefile | 3 +
> tools/logos/esd.bmp | Bin 0 -> 35078 bytes
> 10 files changed, 712 insertions(+), 0 deletions(-)
> create mode 100644 board/esd/otc570/Makefile
> create mode 100644 board/esd/otc570/config.mk
> create mode 100644 board/esd/otc570/otc570.c
> create mode 100644 board/esd/otc570/partition.c
> create mode 100644 include/configs/otc570.h
> create mode 100644 tools/logos/esd.bmp
>
Applied
Thanks,
Tom
prev parent reply other threads:[~2010-01-31 14:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-25 9:50 [U-Boot] [PATCH v2] at91: Add esd gmbh OTC570 board support Daniel Gorsulowski
2010-01-31 14:54 ` Tom [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B65998B.90705@windriver.com \
--to=tom.rix@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox