From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joonyoung Shim Date: Mon, 08 Feb 2010 19:55:48 +0900 Subject: [U-Boot] [PATCH] s3c64xx: Add ifdef at the S3C64XX only codes Message-ID: <4B6FEDB4.5070104@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The pheripheral port address(0x70000000 - 0x7fffffff) exists at only S3C64XX cpu. The pheripheral port setup codes should be executed by only S3C64XX cpu. Signed-off-by: Joonyoung Shim --- cpu/arm1176/start.S | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S index 68a356d..5d9fba9 100644 --- a/cpu/arm1176/start.S +++ b/cpu/arm1176/start.S @@ -190,10 +190,12 @@ mmu_disable: #endif mmu_disable_phys: +#ifdef CONFIG_S3C64XX /* Peri port setup */ ldr r0, =0x70000000 orr r0, r0, #0x13 mcr p15,0,r0,c15,c2,4 @ 256M (0x70000000 - 0x7fffffff) +#endif /* * Go setup Memory and board specific bits prior to relocation. -- 1.6.3.3