[U-Boot] [PATCH 2/4 v4] arm: add support for the suen3 board from keymile

[Heiko Schocher <hs@denx.de>]

Hello Prafulla,

Prafulla Wadaskar wrote:
>> -----Original Message-----
>> From: Heiko Schocher [mailto:hs at denx.de] 
>> Sent: Friday, February 12, 2010 1:36 PM
>> To: U-Boot user list
>> Cc: Wolfgang Denk; Prafulla Wadaskar; Scott Wood; Stefan Roese
>> Subject: [PATCH 2/4 v4] arm: add support for the suen3 board 
>> from keymile
>>
>> This patch adds support for the Keymile suen3 board which
>> is based on the Marvell Kirkwood (88F6281) SoC. As this
>> is a variant of the mgcoge2_arm_p1a board, this board
>> also uses common code stored in board/keymile/km_arm/km_arm.c
>>
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> ---
>> - changes since v1:
>>   added comments from Wolfgang Denk:
>>   get rid of flash_info_t define in board config
>>   (to get this working patch 1/2 is introduced/needed)
>>
>> - changes since v2:
>>   added comments from Wolfgang Denk
>>   - rearranged if/else in do_spi_toggle()
>>   - added I/O accessor functions for bootcounter
>>
>> - changes since v3:
>>   added comment Scott Wood
>>   - removed nand_init in do_spi_toggle()
>>
>>   added comments from Prafulla Wadagaskar
>>   - km-arm.h renamed to km_arm.h
>>   - reworked eeprom_write_enable() (deleted it)
>>     (when reviewing this function, it cropped up, that
>>      this pin is connected through a gpio pin, not as
>>      in previous version, through the boco (a FPGA))
>>   - moved set_sda(), set_scl(), get_sda(), get_scl()
>>     to km_arm.c
>>   - split patch in 4 patches (for each board an extra patch)
>>   - renamed sdramregs.txt in kwbimage.cfg, also license
>>     info added.
>>
>>  MAINTAINERS             |    1 +
>>  MAKEALL                 |    1 +
>>  Makefile                |    3 +
>>  include/configs/suen3.h |  103
> 
> There is some code in earlier patch (i.e 1/4) for this board support that should reflect here.
> This gives better understanding

Hmm.. or I should better make the suen3 port as the first patch,
and the other board revisions as follow ups ... ?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany