public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Achim Ehrlich <aehrlich@taskit.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] AT91: Added support for taskit Stamp9G20 and PortuxG20
Date: Mon, 22 Feb 2010 13:35:58 +0100	[thread overview]
Message-ID: <4B827A2E.5000200@taskit.de> (raw)
In-Reply-To: <m2r5oibtqt.fsf@ohwell.denx.de>

Hello Detlef,

>> Signed-off-by: Achim Ehrlich <aehrlich@taskit.de>
>> ---
>>  Makefile                           |    9 ++
>>  board/taskit/stamp9G20/Makefile    |   56 ++++++++++
>>  board/taskit/stamp9G20/config.mk   |    1 +
>>  board/taskit/stamp9G20/led.c       |   35 ++++++
>>  board/taskit/stamp9G20/partition.c |   40 +++++++
>>  board/taskit/stamp9G20/stamp9G20.c |  200 ++++++++++++++++++++++++++++++++++++
>>  include/configs/stamp9G20.h        |  197 +++++++++++++++++++++++++++++++++++
>>  7 files changed, 538 insertions(+), 0 deletions(-)
>>  create mode 100644 board/taskit/stamp9G20/Makefile
>>  create mode 100644 board/taskit/stamp9G20/config.mk
>>  create mode 100644 board/taskit/stamp9G20/led.c
>>  create mode 100644 board/taskit/stamp9G20/partition.c
>>  create mode 100644 board/taskit/stamp9G20/stamp9G20.c
>>  create mode 100644 include/configs/stamp9G20.h
>>
>> diff --git a/Makefile b/Makefile
>> index 524b9da..ef1a7d4 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -2906,6 +2906,15 @@ TNY_A9260_config	:	unconfig
>>  	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
>>  	@$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
>>  
>> +portuxG20_config \
>> +stamp9G20_config	:	unconfig
>> +	@mkdir -p $(obj)include
>> +	@if [ "$(findstring portux,$@)" ] ; then \
>> +		echo "#define CONFIG_PORTUXG20 1" >$(obj)include/config.h; \
>> +		$(XECHO) "... PortuxG20";\
>> +	fi;
>> +	@$(MKCONFIG) -a stamp9G20 arm arm926ejs stamp9G20 taskit at91
>> +
>>  ########################################################################
>>  ## ARM Integrator boards - see doc/README-integrator for more info.
>>  integratorap_config	\
>> diff --git a/board/taskit/stamp9G20/Makefile b/board/taskit/stamp9G20/Makefile
>> new file mode 100644
>> index 0000000..ef82428
>> --- /dev/null
>> +++ b/board/taskit/stamp9G20/Makefile
>> @@ -0,0 +1,56 @@
>> +#
>> +# (C) Copyright 2003-2008
>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> +#
>> +# (C) Copyright 2008
>> +# Stelian Pop <stelian.pop@leadtechdesign.com>
>> +# Lead Tech Design <www.leadtechdesign.com>
> 
> Well actually I am not a fan of including all these copyrights in a file
> which has so little content - so I'd vote to remove them and include
> your own copyright.
> 
> But if for some reason the copyrights are not removed, then please at
> least add yourself in.
> 
> 
> [...]

OK.

> 
>> diff --git a/board/taskit/stamp9G20/led.c b/board/taskit/stamp9G20/led.c
>> new file mode 100644
>> index 0000000..dc6ac63
>> --- /dev/null
>> +++ b/board/taskit/stamp9G20/led.c
>> @@ -0,0 +1,35 @@
>> +/*
>> + * (C) Copyright 2007-2008
>> + * Stelian Pop <stelian.pop@leadtechdesign.com>
>> + * Lead Tech Design <www.leadtechdesign.com>
> 
> Dito.

I haven't changed one bit in this file, I really do not feel like even adding my 
copyright.

> 
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/arch/at91sam9260.h>
>> +#include <asm/arch/at91_pmc.h>
>> +#include <asm/arch/gpio.h>
>> +#include <asm/arch/io.h>
>> +
>> +void coloured_LED_init(void)
>> +{
>> +	/* Enable clock */
>> +	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
>> +}
>> diff --git a/board/taskit/stamp9G20/partition.c b/board/taskit/stamp9G20/partition.c
>> new file mode 100644
>> index 0000000..2629c67
>> --- /dev/null
>> +++ b/board/taskit/stamp9G20/partition.c
>> @@ -0,0 +1,40 @@
>> +/*
>> + * (C) Copyright 2008
>> + * Ulf Samuelsson <ulf@atmel.com>
> 
> Dito.
> 
>> diff --git a/board/taskit/stamp9G20/stamp9G20.c b/board/taskit/stamp9G20/stamp9G20.c
>> new file mode 100644
>> index 0000000..28cd8b1
>> --- /dev/null
>> +++ b/board/taskit/stamp9G20/stamp9G20.c
>> @@ -0,0 +1,200 @@
>> +/*
>> + * (C) Copyright 2007-2008
>> + * Stelian Pop <stelian.pop@leadtechdesign.com>
>> + * Lead Tech Design <www.leadtechdesign.com>
>> + *
>> + * Achim Ehrlich <aehrlich@taskit.de>
>> + * taskit GmbH <www.taskit.de>
> 
> Ok, this time you added your name - although I would have expected a
> year.
> 

Hmm, right.
 
Kind regards

Achim 

-- 
product manager

email:aehrlich at taskit.de 
Tel.: ++49 30 611295-25
Fax: ++49 30 611295-11

--
taskit GmbH
Seelenbinderstr. 33 | D-12555 Berlin
web:http://www.taskit.de
Amtsgericht Charlottenburg: 93HRB39014
Managing director: Thorsten Raulfs
--

  reply	other threads:[~2010-02-22 12:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-17 16:10 [U-Boot] [PATCH] AT91: Added support for taskit Stamp9G20 and PortuxG20 Achim Ehrlich
2010-02-18 12:32 ` Wolfgang Denk
2010-02-22 12:31   ` Achim Ehrlich
2010-02-22 13:06     ` Wolfgang Denk
2010-02-18 12:42 ` Detlev Zundel
2010-02-22 12:35   ` Achim Ehrlich [this message]
2010-02-22 13:04     ` Detlev Zundel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B827A2E.5000200@taskit.de \
    --to=aehrlich@taskit.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox