From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 25 Feb 2010 13:17:33 +0100 Subject: [U-Boot] imx27lite board support no longer compile In-Reply-To: <4B8663D3.7040808@denx.de> References: <4B8663D3.7040808@denx.de> Message-ID: <4B866A5D.6040605@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Heiko Schocher wrote: > Hello Stefano, > Hi Heiko, > your following commit breaks building the imx27lite board > (and all boards, which uses the ./drivers/net/fec_mxc.c > I think), because the following function is missing: > > [hs at pollux u-boot]$ grep -lr imx_get_fecclk . > ./drivers/net/fec_mxc.c > ./drivers/net/fec_mxc.o > ./drivers/net/libnet.a > ./LOG/imx27lite.ERR > [hs at pollux u-boot]$ > > and this function is only used in this driver ... > > --------------------------------------------------------------- > > author Stefano Babic > commit 4294b2485bf0e8d68c893190a96bb0e7856b12c4 > > fec_mxc: add support for MX51 processor > > The patch add support for the Freescale mx51 processor > > to the FEC ethernet driver. > > > Signed-off-by: Stefano Babic > Signed-off-by: Ben Warren > --------------------------------------------------------------- > > ... any ideas? Yes, at the same time two patches for the fec_imx was sent by me and by John. John sends to me and to the ML a comment informing that he made patches to factor a lot of SOC specific, cleaning up code and avoiding nasty #ifdef. I see his patch in archive as http://www.mail-archive.com/u-boot at lists.denx.de/msg27481.html. I have already used the proposed function, but John's patch is not already in the mainline - probably it is still in the imx queue. Jason is working to bring a lot of MX patches in the mainline this week. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================