From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 02 Mar 2010 15:43:31 +0100 Subject: [U-Boot] [STATUS] i.MX / Freescale ARM custodian needed In-Reply-To: <4b73d43f1002050815w32b685e1g563870e841cd49b3@mail.gmail.com> References: <20100205141317.CEB7312E33A5@gemini.denx.de> <4B6C31A8.6050202@windriver.com> <4b73d43f1002050815w32b685e1g563870e841cd49b3@mail.gmail.com> Message-ID: <4B8D2413.7070703@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de John Rigby wrote: > Sorry for the double reply. This is the message I wanted to reply to. Hi John, hi Tom, > I have some i.mx25/TX25 patches. They are all prefixed with PATCH V3. > Scott already took the nand and spl patches. Ben ok'd the FEC > patches but said they needed to go in via your tree because they > modify i.mx files as well as the mxc fec driver. No one commented on > the rest but Wolfgang has verified that they compile and boot on TX25. As reported by Wolfgang, I won the custodian job for the IMX architecture, at least for a while ;) I am putting your patches into the u-boot-imx tree. > http://lists.denx.de/pipermail/u-boot/2010-January/067073.html > http://lists.denx.de/pipermail/u-boot/2010-January/067077.html As you reported, the fec_mxc.c driver needs to be merged, because at the same time you add support for the MX25 and I did for the MX51. My patch went already to the mainline, so merge is needed. I am asking both which is the current status and how to proceed. Tom, if you have not yet try to merge the driver, I will do it. I want only to be sure we do not do the work twice. John, let me know if you prefer to check yourself (I cannot test on a MX25 board, I can only recheck on a MX51 to see if something goes wrong for this board). Thanks, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================