From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Sat, 20 Mar 2010 18:56:57 +0100
Subject: [U-Boot] [PATCH 2/3] fsl_esdhc: Add function to reset the eSDHC
	controller
In-Reply-To: <1269013095-6725-2-git-send-email-galak@kernel.crashing.org>
References: <1269013095-6725-1-git-send-email-galak@kernel.crashing.org>
	<1269013095-6725-2-git-send-email-galak@kernel.crashing.org>
Message-ID: <4BA50C69.7090108@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Kumar Gala wrote:
> From: Jerry Huang <Chang-Ming.Huang@freescale.com>
> 
> To support multiple block read command we must set abort or use auto
> CMD12.  If we booted from eSDHC controller neither of these are used
> and thus we need to reset the controller to allow multiple block read
> to function.
> 
> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

Tested successfully on mx51evk.

Acked-by: Stefano Babic <sbabic@denx.de>

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================