* [U-Boot] [PATCH v2] cfi_flash: precision and underflow problem in tout calculation
@ 2010-03-24 0:55 Thomas Chou
2010-03-24 13:46 ` Stefan Roese
2010-03-24 15:00 ` [U-Boot] [PATCH v3] " Thomas Chou
0 siblings, 2 replies; 5+ messages in thread
From: Thomas Chou @ 2010-03-24 0:55 UTC (permalink / raw)
To: u-boot
From: Renato Andreola <renato.andreola@imagos.it>
With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Renato Andreola <renato.andreola@imagos.it>
---
drivers/mtd/cfi_flash.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index fdba297..cd1a86e 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -537,7 +537,10 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector,
ulong start;
#if CONFIG_SYS_HZ != 1000
- tout *= CONFIG_SYS_HZ/1000;
+ if ((ulong)CONFIG_SYS_HZ > 100000)
+ tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid overflow */
+ else
+ tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000);
#endif
/* Wait for command completion */
--
1.6.6.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2] cfi_flash: precision and underflow problem in tout calculation
2010-03-24 0:55 [U-Boot] [PATCH v2] cfi_flash: precision and underflow problem in tout calculation Thomas Chou
@ 2010-03-24 13:46 ` Stefan Roese
2010-03-24 15:02 ` Thomas Chou
2010-03-24 15:00 ` [U-Boot] [PATCH v3] " Thomas Chou
1 sibling, 1 reply; 5+ messages in thread
From: Stefan Roese @ 2010-03-24 13:46 UTC (permalink / raw)
To: u-boot
Hi Thomas,
On Wednesday 24 March 2010 01:55:28 Thomas Chou wrote:
> From: Renato Andreola <renato.andreola@imagos.it>
>
> With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.
>
> Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
> Signed-off-by: Renato Andreola <renato.andreola@imagos.it>
Sorry for nitpicking again, but you need to add your S-o-b line as well? The
order should be
Signed-off-by: Renato Andreola <renato.andreola@imagos.it>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
since Renato is the original author.
Thanks.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2] cfi_flash: precision and underflow problem in tout calculation
2010-03-24 13:46 ` Stefan Roese
@ 2010-03-24 15:02 ` Thomas Chou
0 siblings, 0 replies; 5+ messages in thread
From: Thomas Chou @ 2010-03-24 15:02 UTC (permalink / raw)
To: u-boot
On 03/24/2010 09:46 PM, Stefan Roese wrote:
> Hi Thomas,
>
> On Wednesday 24 March 2010 01:55:28 Thomas Chou wrote:
>
>> From: Renato Andreola<renato.andreola@imagos.it>
>>
>> With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.
>>
>> Signed-off-by: Alessandro Rubini<rubini@gnudd.com>
>> Signed-off-by: Renato Andreola<renato.andreola@imagos.it>
>>
> Sorry for nitpicking again, but you need to add your S-o-b line as well? The
> order should be
>
> Signed-off-by: Renato Andreola<renato.andreola@imagos.it>
> Signed-off-by: Alessandro Rubini<rubini@gnudd.com>
> Signed-off-by: Thomas Chou<thomas@wytron.com.tw>
>
> since Renato is the original author.
>
Hi Stefan,
No problem. Please review again.
Best regards,
Thomas
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v3] cfi_flash: precision and underflow problem in tout calculation
2010-03-24 0:55 [U-Boot] [PATCH v2] cfi_flash: precision and underflow problem in tout calculation Thomas Chou
2010-03-24 13:46 ` Stefan Roese
@ 2010-03-24 15:00 ` Thomas Chou
2010-03-25 8:46 ` Stefan Roese
1 sibling, 1 reply; 5+ messages in thread
From: Thomas Chou @ 2010-03-24 15:00 UTC (permalink / raw)
To: u-boot
From: Renato Andreola <renato.andreola@imagos.it>
With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.
Signed-off-by: Renato Andreola <renato.andreola@imagos.it>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
drivers/mtd/cfi_flash.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index fdba297..cd1a86e 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -537,7 +537,10 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector,
ulong start;
#if CONFIG_SYS_HZ != 1000
- tout *= CONFIG_SYS_HZ/1000;
+ if ((ulong)CONFIG_SYS_HZ > 100000)
+ tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid overflow */
+ else
+ tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000);
#endif
/* Wait for command completion */
--
1.6.6.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v3] cfi_flash: precision and underflow problem in tout calculation
2010-03-24 15:00 ` [U-Boot] [PATCH v3] " Thomas Chou
@ 2010-03-25 8:46 ` Stefan Roese
0 siblings, 0 replies; 5+ messages in thread
From: Stefan Roese @ 2010-03-25 8:46 UTC (permalink / raw)
To: u-boot
On Wednesday 24 March 2010 16:00:47 Thomas Chou wrote:
> From: Renato Andreola <renato.andreola@imagos.it>
>
> With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.
Applied to u-boot-cfi-flash/master. Thanks.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-03-25 8:46 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-24 0:55 [U-Boot] [PATCH v2] cfi_flash: precision and underflow problem in tout calculation Thomas Chou
2010-03-24 13:46 ` Stefan Roese
2010-03-24 15:02 ` Thomas Chou
2010-03-24 15:00 ` [U-Boot] [PATCH v3] " Thomas Chou
2010-03-25 8:46 ` Stefan Roese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox