[U-Boot] [PATCH 2/8] Nomadik: move gpio driver to drivers/gpio

[Tom <Tom.Rix@windriver.com>]

Rabin Vincent wrote:
> The Nomadik GPIO driver will also be used on the U8500 SoC, so move it
> out of platform-specific code.
> 
> Acked-by: Alessandro Rubini <rubini@unipv.it>
> Acked-by: Michael Brandt <michael.brandt@stericsson.com>
> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
> ---
>  board/st/nhk8815/nhk8815.c                         |    2 +-
>  cpu/arm926ejs/nomadik/Makefile                     |    1 -
>  drivers/gpio/Makefile                              |    1 +
>  .../nomadik/gpio.c => drivers/gpio/nomadik_gpio.c  |    2 +-
>  include/configs/nhk8815.h                          |    7 +++++--
>  .../arch-nomadik/gpio.h => nomadik_gpio.h}         |    0
>  6 files changed, 8 insertions(+), 5 deletions(-)
>  rename cpu/arm926ejs/nomadik/gpio.c => drivers/gpio/nomadik_gpio.c (98%)
>  rename include/{asm-arm/arch-nomadik/gpio.h => nomadik_gpio.h} (100%)
> 
> diff --git a/board/st/nhk8815/nhk8815.c b/board/st/nhk8815/nhk8815.c
> index faef810..4f5f94f 100644
> --- a/board/st/nhk8815/nhk8815.c
> +++ b/board/st/nhk8815/nhk8815.c
> @@ -28,7 +28,7 @@
>  #include <common.h>
>  #include <netdev.h>
>  #include <asm/io.h>
> -#include <asm/arch/gpio.h>
> +#include <nomadik_gpio.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> diff --git a/cpu/arm926ejs/nomadik/Makefile b/cpu/arm926ejs/nomadik/Makefile
> index 180db8b..35550d7 100644
> --- a/cpu/arm926ejs/nomadik/Makefile
> +++ b/cpu/arm926ejs/nomadik/Makefile
> @@ -25,7 +25,6 @@ include $(TOPDIR)/config.mk
>  
>  LIB	= $(obj)lib$(SOC).a
>  
> -COBJS	= gpio.o
>  SOBJS	= reset.o
>  
>  SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index d966082..d84f81e 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -28,6 +28,7 @@ LIB 	:= $(obj)libgpio.a
>  COBJS-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
>  COBJS-$(CONFIG_KIRKWOOD_GPIO)	+= kw_gpio.o
>  COBJS-$(CONFIG_MX31_GPIO)	+= mx31_gpio.o
> +COBJS-$(CONFIG_NOMADIK_GPIO)	+= nomadik_gpio.o
>  COBJS-$(CONFIG_PCA953X)		+= pca953x.o
>  
>  COBJS	:= $(COBJS-y)
> diff --git a/cpu/arm926ejs/nomadik/gpio.c b/drivers/gpio/nomadik_gpio.c
> similarity index 98%
> rename from cpu/arm926ejs/nomadik/gpio.c
> rename to drivers/gpio/nomadik_gpio.c
> index 62a375b..e8a7bca 100644
> --- a/cpu/arm926ejs/nomadik/gpio.c
> +++ b/drivers/gpio/nomadik_gpio.c
> @@ -22,7 +22,7 @@
>  
>  #include <common.h>
>  #include <asm/io.h>
> -#include <asm/arch/gpio.h>
> +#include <nomadik_gpio.h>
>  
>  static unsigned long gpio_base[4] = {
>  	NOMADIK_GPIO0_BASE,
> diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
> index 4dd391e..8ba1e5e 100644
> --- a/include/configs/nhk8815.h
> +++ b/include/configs/nhk8815.h
> @@ -99,6 +99,9 @@
>  #define CONFIG_SYS_TIMERBASE	0x101E2000
>  #define CONFIG_NOMADIK_MTU
>  
> +/* GPIO */
> +#define CONFIG_NOMADIK_GPIO
> +
>  /* serial port (PL011) configuration */
>  #define CONFIG_PL011_SERIAL
>  #define CONFIG_CONS_INDEX	1
> @@ -110,9 +113,9 @@
>  #define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
>  #define CONFIG_PL011_CLOCK	48000000
>  
> -/* i2c, for the port extenders (uses gpio.c in board directory) */
> +/* i2c, for the port extenders (uses drivers/gpio/nomadik_gpio.c) */

May want to just  strip the path '(uses ....)' from the comment
>  #ifndef __ASSEMBLY__
> -#include <asm/arch/gpio.h>
> +#include <nomadik_gpio.h>

It would be better if the #include was not in config file.
Can this be moved to the C files that need it ?

>  #define CONFIG_CMD_I2C
>  #define CONFIG_SOFT_I2C
>  #define CONFIG_SYS_I2C_SPEED	400000
> diff --git a/include/asm-arm/arch-nomadik/gpio.h b/include/nomadik_gpio.h
> similarity index 100%
> rename from include/asm-arm/arch-nomadik/gpio.h
> rename to include/nomadik_gpio.h

Tom