[U-Boot] net, kirkwood_egiga: init mac address before using network commands

[Heiko Schocher <hs@denx.de>]

initialize mac address with the value from "ethaddr", before
doing some network commands. This is not in line with u-boot
design principle "not to initalize not used devices", and
maybe should go away, if there is a solution for passing
the mac address to arm linux kernels.

Tested on the suen3 board.

Signed-off-by: Heiko Schocher <hs@denx.de>
---
posting this patch as a result of this discussion:

http://lists.denx.de/pipermail/u-boot/2010-March/069025.html

 drivers/net/kirkwood_egiga.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c
index 2ad7fea..e8b3777 100644
--- a/drivers/net/kirkwood_egiga.c
+++ b/drivers/net/kirkwood_egiga.c
@@ -678,7 +678,7 @@ int kirkwood_egiga_initialize(bd_t * bis)
 			return -1;
 		}

-		while (!eth_getenv_enetaddr(s, dev->enetaddr)) {
+		if (!eth_getenv_enetaddr(s, dev->enetaddr)) {
 			/* Generate Random Private MAC addr if not set */
 			dev->enetaddr[0] = 0x02;
 			dev->enetaddr[1] = 0x50;
@@ -688,6 +688,7 @@ int kirkwood_egiga_initialize(bd_t * bis)
 			dev->enetaddr[5] = get_random_hex();
 			eth_setenv_enetaddr(s, dev->enetaddr);
 		}
+		port_uc_addr_set(dkwgbe->regs, dev->enetaddr);

 		dev->init = (void *)kwgbe_init;
 		dev->halt = (void *)kwgbe_halt;
-- 
1.6.2.5

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany