From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 30 Mar 2010 19:46:26 +0200 Subject: [U-Boot] [PATCH 2/2 v2] net, fec_mxc: setup the mac address in the device registers Message-ID: <4BB238F2.8050807@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de always setup mac address register with the contents in ethaddr. This is not in line with u-boot design principle "not to initalize not used devices", and maybe should go away, if there is a solution for passing the mac address to arm linux kernels. Tested on the magnesium board. Signed-off-by: Heiko Schocher --- - changes since v1 posted here: http://lists.denx.de/pipermail/u-boot/2010-March/069192.html - splitted in two patches as Wolfgang suggested drivers/net/fec_mxc.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 98ff64b..6841208 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -752,9 +752,10 @@ static int fec_probe(bd_t *bd) if (!eth_getenv_enetaddr("ethaddr", ethaddr)) { if (fec_get_hwaddr(edev, ethaddr) == 0) { printf("got MAC address from EEPROM: %pM\n", ethaddr); - memcpy(edev->enetaddr, ethaddr, 6); } } + memcpy(edev->enetaddr, ethaddr, 6); + fec_set_hwaddr(edev); return 0; } -- 1.6.2.5 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany