[U-Boot] [PATCH 1/2 v2] net, kirkwood_egiga: only setup the device enetaddr with random value, if ethaddr is not setup

[Heiko Schocher <hs@denx.de>]

if ethaddr is not setup in the environment, fill the device
enetaddr with a random value. Don;t touch the ethaddr
settings, only dev->enetaddr.

Tested on the suen3 board.

Signed-off-by: Heiko Schocher <hs@denx.de>
---
- changes since v1 posted here:
  http://lists.denx.de/pipermail/u-boot/2010-March/069193.html

  - split in two patches as Wolfgang suggested

 drivers/net/kirkwood_egiga.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c
index 2ad7fea..f8e421c 100644
--- a/drivers/net/kirkwood_egiga.c
+++ b/drivers/net/kirkwood_egiga.c
@@ -678,7 +678,7 @@ int kirkwood_egiga_initialize(bd_t * bis)
 			return -1;
 		}

-		while (!eth_getenv_enetaddr(s, dev->enetaddr)) {
+		if (!eth_getenv_enetaddr(s, dev->enetaddr)) {
 			/* Generate Random Private MAC addr if not set */
 			dev->enetaddr[0] = 0x02;
 			dev->enetaddr[1] = 0x50;
@@ -686,7 +686,6 @@ int kirkwood_egiga_initialize(bd_t * bis)
 			dev->enetaddr[3] = get_random_hex();
 			dev->enetaddr[4] = get_random_hex();
 			dev->enetaddr[5] = get_random_hex();
-			eth_setenv_enetaddr(s, dev->enetaddr);
 		}

 		dev->init = (void *)kwgbe_init;
-- 
1.6.2.5

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany