From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Mon, 19 Apr 2010 22:10:35 +0200
Subject: [U-Boot] [PATCH 1/6] MX: Added Freescale Power Management Driver
In-Reply-To: <4BCCA3FD.5020202@gmail.com>
References: <1268756287-2030-1-git-send-email-sbabic@denx.de>
	<1271663820-7358-1-git-send-email-sbabic@denx.de>
	<4BCCA3FD.5020202@gmail.com>
Message-ID: <4BCCB8BB.6070605@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Magnus Lilja wrote:
> Hi
> 

Hi Magnus,

> On 04/19/2010 09:56 AM, Stefano Babic wrote:
>> The patch add supports for the Freescale's Power
>> Management Controller (known as Atlas) used together with i.MX31/51
>> processors. It was tested with a MC13783 (MX31) and
>> MC13892 (MX51).
> 
> You should try and compile all i.MX31 boards with your patches. I tried i.MX31 Litekit and it failed:
> mxc_spi.c: In function 'spi_setup_slave':
> mxc_spi.c:406: error: 'ctrl_reg' undeclared (first use in this function)
> mxc_spi.c:406: error: (Each undeclared identifier is reported only once
> mxc_spi.c:406: error: for each function it appears in.)
> 
> I applied your patches on top of the u-boot-imx-tree.

Thanks for testing, I see. I will check with all MX.31 boards and I will
resubmit an updated version of the patches soon.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================