[U-Boot] [PATCH 3/3] arm: Add support for jadecpu board based on MB86R01 SoC

["Matthias Weißer" <weisserm@arcor.de>]

Am 22.04.2010 14:51, schrieb Wolfgang Denk:
>> +	if ((in_word&  0xC0) == 0xC0) {
>> +		setenv("stdin", "serial");
>> +		setenv("stdout", "serial");
>> +		setenv("stderr", "serial");
>> +		setenv("bootdelay", "10");
>> +	} else if ((in_word&  0xC0) != 0) {
>> +		setenv("stdout", "vga");
>> +		setenv("bootcmd", "mw.l 0x40000000 0 1024; usb start;"
>> +			"fatls usb 0; fatload usb 0 0x40000000 mcq5resq.bin;"
>> +			"bootelf 0x40000000; bootelf 0x10080000");
>> +		setenv("bootdelay", "5");
>
> I consider such mandatory settings of behaviour-critical variables as
> "bootcmd" and "bootdelay" bad style.  I recommend to use oither
> variables instead, and to use these as defaults, so the user still has
> a choice to define his own "bootcmd" which does not get overwritten at
> each boot.

OK. I think this will be the approach you mentioned:

setenv bootcmd '${gs_bootcmd}'
setenv gs_bootcmd bootelf 0x...

Is the redirection of the console OK as it is done in the above code?

Regards,
Matthias