From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Fri, 23 Apr 2010 14:25:57 +0200
Subject: [U-Boot] [PATCH V2] Moved board specific values in config file
In-Reply-To: <996B8FEA386F2F4886BC50A82C84649B063EAC@zch01exm23.fsl.freescale.net>
References: <1268756600-2244-1-git-send-email-sbabic@denx.de>
	<1269776606-6728-1-git-send-email-sbabic@denx.de>
	<996B8FEA386F2F4886BC50A82C84649B063EAC@zch01exm23.fsl.freescale.net>
Message-ID: <4BD191D5.7030308@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Liu Hui-R64343 wrote:
> Stefano ,
> 
Hi Jason,

>>  
>> +#define CONFIG_SYS_DDR_CLKSEL	0
>> +#define CONFIG_SYS_CLKTL_CBCDR	0x59E35100
> 
> It's nice to have some comments about the value selected.

This patch is more as one month old and was already merged into the
mainline, so we need a new patch to for setting a comment.
As your comment regards only the description to a configuration value, I
will not do it now. However, I write down your comment for the next time
this file will be changed ;)

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================