* [U-Boot] [PATCH] MX31: Adjust default environment for QONG module
2010-04-28 11:58 [U-Boot] [PATCH] MX31: Adjust default environment for QONG module Stefano Babic
@ 2010-04-28 15:29 ` Wolfgang Denk
2010-04-28 16:10 ` Stefano Babic
2010-04-28 16:45 ` [U-Boot] [PATCH V2] " Stefano Babic
1 sibling, 1 reply; 4+ messages in thread
From: Wolfgang Denk @ 2010-04-28 15:29 UTC (permalink / raw)
To: u-boot
Dear Stefano Babic,
In message <1272455915-1143-1-git-send-email-sbabic@denx.de> you wrote:
> Because the the size of u-boot increased after adding
> new features (mainly the support for ubi/ubifs), storing
> u-boot requires an additional sector on the flash. The patch
> adjusts the kernel_addr and mtdparts variables giving 128KB
> more space for u-boot code.
...
> @@ -144,7 +144,7 @@
> "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
> "addmisc=setenv bootargs ${bootargs}\0" \
> "uboot_addr=a0000000\0" \
> - "kernel_addr=a0080000\0" \
> + "kernel_addr=a00a0000\0" \
> "ramdisk_addr=a0300000\0" \
=========^^^^^^^^^^^^^^^^^^^^^
> "u-boot=qong/u-boot.bin\0" \
> "kernel_addr_r=80800000\0" \
> @@ -274,7 +274,7 @@ extern int qong_nand_rdy(void *chip);
> #define CONFIG_FLASH_CFI_MTD
> #define MTDIDS_DEFAULT "nor0=physmap-flash.0"
> #define MTDPARTS_DEFAULT \
> - "mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \
> + "mtdparts=physmap-flash.0:384k(U-Boot),128k(env1)," \
> "128k(env2),2560k(kernel),13m(ramdisk),-(user)"
This shifts the start address of the "ramdisk' and "user" partitions
to some odd addresses; also, this makes the definition of
"ramdisk_addr" (see above) incorrct.
I recommend to do this instead:
- "mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \
- "128k(env2),2560k(kernel),13m(ramdisk),-(user)"
+ "mtdparts=physmap-flash.0:384k(U-Boot),128k(env1)," \
+ "128k(env2),2432k(kernel),13m(ramdisk),-(user)"
What do you think?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
People seldom know what they want until you give them what they ask
for.
^ permalink raw reply [flat|nested] 4+ messages in thread* [U-Boot] [PATCH V2] MX31: Adjust default environment for QONG module
2010-04-28 11:58 [U-Boot] [PATCH] MX31: Adjust default environment for QONG module Stefano Babic
2010-04-28 15:29 ` Wolfgang Denk
@ 2010-04-28 16:45 ` Stefano Babic
1 sibling, 0 replies; 4+ messages in thread
From: Stefano Babic @ 2010-04-28 16:45 UTC (permalink / raw)
To: u-boot
Because the the size of u-boot increased after adding
new features (mainly the support for ubi/ubifs), storing
u-boot requires an additional sector on the flash. The patch
adjusts the kernel_addr and mtdparts variable giving 128KB
more space for u-boot code.
Signed-off-by: Stefano Babic <sbabic@denx.de>
---
include/configs/qong.h | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 1284a00..dc828f6 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -144,7 +144,7 @@
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addmisc=setenv bootargs ${bootargs}\0" \
"uboot_addr=a0000000\0" \
- "kernel_addr=a0080000\0" \
+ "kernel_addr=a00a0000\0" \
"ramdisk_addr=a0300000\0" \
"u-boot=qong/u-boot.bin\0" \
"kernel_addr_r=80800000\0" \
@@ -276,7 +276,7 @@ extern int qong_nand_rdy(void *chip);
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
#define MTDPARTS_DEFAULT \
- "mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \
- "128k(env2),2560k(kernel),13m(ramdisk),-(user)"
+ "mtdparts=physmap-flash.0:384k(U-Boot),128k(env1)," \
+ "128k(env2),2432k(kernel),13m(ramdisk),-(user)"
#endif /* __CONFIG_H */
--
1.6.3.3
^ permalink raw reply related [flat|nested] 4+ messages in thread