From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Save environment data to mmc.
Date: Thu, 29 Apr 2010 16:33:34 +0200 [thread overview]
Message-ID: <4BD998BE.7040501@denx.de> (raw)
In-Reply-To: <12725268173199-git-send-email-r65388@freescale.com>
Terry Lv wrote:
> This patch is to save environment data to mmc card.
> It uses interfaces defined in generic mmc.
Hi Terry,
>
> Signed-off-by: Terry Lv <r65388@freescale.com>
> ---
> arch/arm/lib/board.c | 10 ++--
> arch/powerpc/lib/board.c | 12 ++--
> common/Makefile | 1 +
> common/cmd_nvedit.c | 1 +
> common/env_mmc.c | 154 ++++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 167 insertions(+), 11 deletions(-)
> create mode 100644 common/env_mmc.c
Could you set a version of your patch (something like [PATCH V*] in the
subject, so it is easier to track changes ? This is the third version,
but it is difficult to get it without searching in archive.
>
> diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
> index f5660a9..f62e0eb 100644
> --- a/arch/arm/lib/board.c
> +++ b/arch/arm/lib/board.c
> @@ -347,6 +347,11 @@ void start_armboot (void)
> dataflash_print_info();
> #endif
>
> +#ifdef CONFIG_GENERIC_MMC
> + puts ("MMC: ");
> + mmc_initialize (gd->bd);
> +#endif
> +
> /* initialize environment */
> env_relocate ();
>
> @@ -419,11 +424,6 @@ extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
> board_late_init ();
> #endif
>
> -#ifdef CONFIG_GENERIC_MMC
> - puts ("MMC: ");
> - mmc_initialize (gd->bd);
> -#endif
> -
> #ifdef CONFIG_BITBANGMII
> bb_miiphy_init();
> #endif
Because it is required to move the initialization of the mmc before
env_relocate(), we need probably to advise that there are some
consequences. If someone implements the mmc support in board_late_init()
(setting a pin multiplexer or something like that, for example), it does
not work. I think we should at least write a comment to advise that the
mmc/sd controller should work after board_init() is called.
However, after a quick check in the arm boards, I have not found a board
that is initializing the mmc controller in board_late_init(). Not sure
for powerpc.
> diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
> index eb89e9e..78f75fb 100644
> --- a/common/cmd_nvedit.c
> +++ b/common/cmd_nvedit.c
> @@ -59,6 +59,7 @@ DECLARE_GLOBAL_DATA_PTR;
> !defined(CONFIG_ENV_IS_IN_FLASH) && \
> !defined(CONFIG_ENV_IS_IN_DATAFLASH) && \
> !defined(CONFIG_ENV_IS_IN_MG_DISK) && \
> + !defined(CONFIG_ENV_IS_IN_MMC) && \
> !defined(CONFIG_ENV_IS_IN_NAND) && \
> !defined(CONFIG_ENV_IS_IN_NVRAM) && \
> !defined(CONFIG_ENV_IS_IN_ONENAND) && \
next prev parent reply other threads:[~2010-04-29 14:33 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-29 7:40 [U-Boot] [PATCH] Save environment data to mmc Terry Lv
2010-04-29 14:33 ` Stefano Babic [this message]
2010-04-30 3:47 ` Lv Terry-R65388
2010-04-30 13:14 ` Stefano Babic
-- strict thread matches above, loose matches on Subject: below --
2010-04-28 7:52 Terry Lv
2010-04-28 13:30 ` Andy Fleming
2009-11-19 6:58 Terry Lv
2010-03-02 17:03 ` Stefano Babic
2010-03-04 3:01 ` Lv Terry-R65388
2010-03-04 3:07 ` Liu Hui-R64343
2009-11-05 7:43 Terry Lv
2009-11-05 12:09 ` Mike Frysinger
2009-11-06 1:54 ` Lv Terry-R65388
2009-11-05 18:52 ` Wolfgang Denk
2009-11-04 10:02 Terry Lv
2009-11-04 11:01 ` Mike Frysinger
2009-11-05 7:45 ` Lv Terry-R65388
2009-11-04 9:51 Terry Lv
2009-11-04 9:55 ` Lv Terry-R65388
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BD998BE.7040501@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox