From: Tom Rix <tom@bumblecow.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs
Date: Sun, 02 May 2010 18:49:01 -0500 [thread overview]
Message-ID: <4BDE0F6D.5080801@bumblecow.com> (raw)
In-Reply-To: <1272250610-15439-9-git-send-email-vipin.kumar@st.com>
Vipin KUMAR wrote:
> Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
> ---
> arch/arm/include/asm/arch-spear/hardware.h | 1 +
> board/spear/spear300/spear300.c | 6 ++++++
> board/spear/spear310/spear310.c | 6 ++++++
> board/spear/spear320/spear320.c | 6 ++++++
> board/spear/spear600/spear600.c | 6 ++++++
> include/configs/spear-common.h | 10 ++++++++--
> include/configs/spear3xx.h | 3 +++
> 7 files changed, 36 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-spear/hardware.h b/arch/arm/include/asm/arch-spear/hardware.h
> index 818f36c..39d64b6 100644
> --- a/arch/arm/include/asm/arch-spear/hardware.h
> +++ b/arch/arm/include/asm/arch-spear/hardware.h
> @@ -31,6 +31,7 @@
> #define CONFIG_SPEAR_SYSCNTLBASE (0xFCA00000)
> #define CONFIG_SPEAR_TIMERBASE (0xFC800000)
> #define CONFIG_SPEAR_MISCBASE (0xFCA80000)
> +#define CONFIG_SPEAR_ETHBASE (0xE0800000)
>
> #define CONFIG_SYS_NAND_CLE (1 << 16)
> #define CONFIG_SYS_NAND_ALE (1 << 17)
> diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c
> index 60ee544..cd24247 100644
> --- a/board/spear/spear300/spear300.c
> +++ b/board/spear/spear300/spear300.c
> @@ -22,6 +22,7 @@
> */
>
> #include <common.h>
> +#include <netdev.h>
> #include <nand.h>
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> @@ -56,3 +57,8 @@ int board_nand_init(struct nand_chip *nand)
>
> return -1;
> }
> +
> +int board_eth_init(bd_t *bis)
> +{
> + return designware_initialize(0, CONFIG_SPEAR_ETHBASE);
> +}
The function can be conditionally compiled in based on
CONFIG_DESIGNWARE_ETH
board_eth_init may be able to go in the spear/common
Tom
> diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c
> index 03dfe16..e8a6552 100644
> --- a/board/spear/spear310/spear310.c
> +++ b/board/spear/spear310/spear310.c
> @@ -23,6 +23,7 @@
> */
>
> #include <common.h>
> +#include <netdev.h>
> #include <nand.h>
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> @@ -57,3 +58,8 @@ int board_nand_init(struct nand_chip *nand)
>
> return -1;
> }
> +
> +int board_eth_init(bd_t *bis)
> +{
> + return dw_mii_initialize(0, CONFIG_SPEAR_ETHBASE);
> +}
> diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c
> index 2ba2dbb..72bc9a5 100644
> --- a/board/spear/spear320/spear320.c
> +++ b/board/spear/spear320/spear320.c
> @@ -23,6 +23,7 @@
> */
>
> #include <common.h>
> +#include <netdev.h>
> #include <nand.h>
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> @@ -57,3 +58,8 @@ int board_nand_init(struct nand_chip *nand)
>
> return -1;
> }
> +
> +int board_eth_init(bd_t *bis)
> +{
> + return dw_mii_initialize(0, CONFIG_SPEAR_ETHBASE);
> +}
> diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c
> index eef9a37..6d921bd 100644
> --- a/board/spear/spear600/spear600.c
> +++ b/board/spear/spear600/spear600.c
> @@ -22,6 +22,7 @@
> */
>
> #include <common.h>
> +#include <netdev.h>
> #include <nand.h>
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> @@ -51,3 +52,8 @@ int board_nand_init(struct nand_chip *nand)
>
> return -1;
> }
> +
> +int board_eth_init(bd_t *bis)
> +{
> + return designware_initialize(0, CONFIG_SPEAR_ETHBASE);
> +}
> diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
> index 68ba293..ecb1fd1 100644
> --- a/include/configs/spear-common.h
> +++ b/include/configs/spear-common.h
> @@ -27,6 +27,11 @@
> * Common configurations used for both spear3xx as well as spear6xx
> */
>
> +/* Ethernet driver configuration */
> +#define CONFIG_DESIGNWARE_ETH
> +#define CONFIG_NET_MULTI
> +#define CONFIG_PHY_RESET_DELAY (10000) /* in usec */
> +
> /* USBD driver configuration */
> #define CONFIG_SPEARUDC
> #define CONFIG_USB_DEVICE
> @@ -98,11 +103,12 @@
> #define CONFIG_CMD_MEMORY
> #define CONFIG_CMD_RUN
> #define CONFIG_CMD_SAVES
> +#define CONFIG_CMD_NET
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
>
> /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
> #include <config_cmd_default.h>
> -#undef CONFIG_CMD_NET
> -#undef CONFIG_CMD_NFS
>
> /*
> * Default Environment Varible definitions
> diff --git a/include/configs/spear3xx.h b/include/configs/spear3xx.h
> index 0248aba..502c50f 100644
> --- a/include/configs/spear3xx.h
> +++ b/include/configs/spear3xx.h
> @@ -41,6 +41,9 @@
>
> #include <configs/spear-common.h>
>
> +/* Ethernet driver configuration */
> +#define CONFIG_DW_ALTDESCRIPTOR 1
> +
> /* Serial Configuration (PL011) */
> #define CONFIG_SYS_SERIAL0 0xD0000000
>
next prev parent reply other threads:[~2010-05-02 23:49 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-26 2:56 [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 17/17] SPEAr : Supporting various configurations for spear3xx and spear6xx boards Vipin KUMAR
2010-05-03 0:38 ` Tom Rix
2010-05-03 7:59 ` Vipin KUMAR
2010-05-03 0:37 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC support added Tom Rix
2010-05-03 8:35 ` Vipin KUMAR
2010-05-03 10:19 ` Tom Rix
2010-05-03 11:17 ` Vipin KUMAR
2010-05-03 0:33 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Tom Rix
2010-05-03 11:14 ` Vipin KUMAR
2010-05-03 0:29 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver " Tom Rix
2010-05-03 0:27 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Tom Rix
2010-04-27 5:08 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Heiko Schocher
2010-05-03 0:25 ` Tom Rix
2010-05-04 9:07 ` Vipin KUMAR
2010-05-04 17:56 ` Scott Wood
2010-05-06 1:44 ` Vipin KUMAR
2010-05-05 21:37 ` Tom Rix
2010-05-06 2:08 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Scott Wood
2010-05-03 0:24 ` Tom Rix
2010-05-04 8:48 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Scott Wood
2010-05-03 0:22 ` Tom Rix
2010-05-04 8:08 ` Vipin KUMAR
2010-05-03 0:14 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Tom Rix
2010-05-04 8:01 ` Vipin KUMAR
2010-05-02 23:49 ` Tom Rix [this message]
2010-05-04 7:15 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Vipin KUMAR
2010-05-02 23:48 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Tom Rix
2010-05-04 6:33 ` Vipin KUMAR
2010-05-04 13:14 ` Tom Rix
2010-05-02 23:40 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Tom Rix
2010-05-04 5:57 ` Vipin KUMAR
2010-05-02 23:37 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Tom Rix
2010-05-04 5:50 ` Vipin KUMAR
2010-05-02 23:36 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Tom Rix
2010-05-04 5:34 ` Vipin KUMAR
2010-05-04 12:18 ` Tom Rix
2010-05-06 4:11 ` Vipin KUMAR
2010-05-06 22:28 ` Wolfgang Denk
2010-05-02 23:33 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Tom Rix
2010-05-04 3:43 ` Vipin KUMAR
2010-05-02 23:31 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Tom Rix
2010-05-04 1:54 ` Vipin KUMAR
2010-05-02 23:27 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Tom Rix
2010-04-30 11:08 ` [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-30 12:48 ` Tom Rix
2010-05-01 10:09 ` Vipin Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BDE0F6D.5080801@bumblecow.com \
--to=tom@bumblecow.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox