From: Tom Rix <tom@bumblecow.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd
Date: Sun, 02 May 2010 19:27:44 -0500 [thread overview]
Message-ID: <4BDE1880.3010201@bumblecow.com> (raw)
In-Reply-To: <1272250610-15439-14-git-send-email-vipin.kumar@st.com>
Vipin KUMAR wrote:
> The smi IP used by spear platform is a ST serial memory interface controller
> The earlier driver adds the driver of this controller as if it is specific to
> spear platform.
> The driver files are now moved into drivers/mtd folder for reusability by other
> platforms
>
Similar cleanup of 'IP' and 'ST'
Tom
> Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
> ---
> drivers/mtd/Makefile | 2 +-
> drivers/mtd/{spr_smi.c => st_smi.c} | 2 +-
> .../arch-spear/spr_smi.h => drivers/mtd/st_smi.h | 4 ++--
> include/configs/spear-common.h | 6 +++---
> 4 files changed, 7 insertions(+), 7 deletions(-)
> rename drivers/mtd/{spr_smi.c => st_smi.c} (99%)
> rename arch/arm/include/asm/arch-spear/spr_smi.h => drivers/mtd/st_smi.h (99%)
>
> diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
> index cbf6f15..d868d27 100644
> --- a/drivers/mtd/Makefile
> +++ b/drivers/mtd/Makefile
> @@ -34,7 +34,7 @@ COBJS-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o
> COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
> COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
> COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o
> -COBJS-$(CONFIG_SPEARSMI) += spr_smi.o
> +COBJS-$(CONFIG_ST_SMI) += st_smi.o
>
> COBJS := $(COBJS-y)
> SRCS := $(COBJS:.o=.c)
> diff --git a/drivers/mtd/spr_smi.c b/drivers/mtd/st_smi.c
> similarity index 99%
> rename from drivers/mtd/spr_smi.c
> rename to drivers/mtd/st_smi.c
> index 189ee6d..80d9fee 100644
> --- a/drivers/mtd/spr_smi.c
> +++ b/drivers/mtd/st_smi.c
> @@ -27,7 +27,7 @@
>
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> -#include <asm/arch/spr_smi.h>
> +#include "st_smi.h"
>
> #if !defined(CONFIG_SYS_NO_FLASH)
>
> diff --git a/arch/arm/include/asm/arch-spear/spr_smi.h b/drivers/mtd/st_smi.h
> similarity index 99%
> rename from arch/arm/include/asm/arch-spear/spr_smi.h
> rename to drivers/mtd/st_smi.h
> index e2e5e8f..37ed503 100644
> --- a/arch/arm/include/asm/arch-spear/spr_smi.h
> +++ b/drivers/mtd/st_smi.h
> @@ -21,8 +21,8 @@
> * MA 02111-1307 USA
> */
>
> -#ifndef SPR_SMI_H
> -#define SPR_SMI_H
> +#ifndef ST_SMI_H
> +#define ST_SMI_H
>
> /* 0xF800.0000 . 0xFBFF.FFFF 64MB SMI (Serial Flash Mem) */
> /* 0xFC00.0000 . 0xFC1F.FFFF 2MB SMI (Serial Flash Reg.) */
> diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
> index e49f267..99923de 100644
> --- a/include/configs/spear-common.h
> +++ b/include/configs/spear-common.h
> @@ -57,10 +57,10 @@
> #if defined(CONFIG_FLASH_PNOR)
> #define CONFIG_SPEAR_EMI 1
> #else
> -#define CONFIG_SPEARSMI 1
> +#define CONFIG_ST_SMI 1
> #endif
>
> -#if defined(CONFIG_SPEARSMI)
> +#if defined(CONFIG_ST_SMI)
>
> #define CONFIG_SYS_MAX_FLASH_BANKS 2
> #define CONFIG_SYS_FLASH_BASE (0xF8000000)
> @@ -125,7 +125,7 @@
> * U-Boot Environment placing definitions.
> */
> #if defined(CONFIG_ENV_IS_IN_FLASH)
> -#ifdef CONFIG_SPEARSMI
> +#ifdef CONFIG_ST_SMI
> /*
> * Environment is in serial NOR flash
> */
next prev parent reply other threads:[~2010-05-03 0:27 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-26 2:56 [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 17/17] SPEAr : Supporting various configurations for spear3xx and spear6xx boards Vipin KUMAR
2010-05-03 0:38 ` Tom Rix
2010-05-03 7:59 ` Vipin KUMAR
2010-05-03 0:37 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC support added Tom Rix
2010-05-03 8:35 ` Vipin KUMAR
2010-05-03 10:19 ` Tom Rix
2010-05-03 11:17 ` Vipin KUMAR
2010-05-03 0:33 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Tom Rix
2010-05-03 11:14 ` Vipin KUMAR
2010-05-03 0:29 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver " Tom Rix
2010-05-03 0:27 ` Tom Rix [this message]
2010-04-27 5:08 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Heiko Schocher
2010-05-03 0:25 ` Tom Rix
2010-05-04 9:07 ` Vipin KUMAR
2010-05-04 17:56 ` Scott Wood
2010-05-06 1:44 ` Vipin KUMAR
2010-05-05 21:37 ` Tom Rix
2010-05-06 2:08 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Scott Wood
2010-05-03 0:24 ` Tom Rix
2010-05-04 8:48 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Scott Wood
2010-05-03 0:22 ` Tom Rix
2010-05-04 8:08 ` Vipin KUMAR
2010-05-03 0:14 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Tom Rix
2010-05-04 8:01 ` Vipin KUMAR
2010-05-02 23:49 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Tom Rix
2010-05-04 7:15 ` Vipin KUMAR
2010-05-02 23:48 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Tom Rix
2010-05-04 6:33 ` Vipin KUMAR
2010-05-04 13:14 ` Tom Rix
2010-05-02 23:40 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Tom Rix
2010-05-04 5:57 ` Vipin KUMAR
2010-05-02 23:37 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Tom Rix
2010-05-04 5:50 ` Vipin KUMAR
2010-05-02 23:36 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Tom Rix
2010-05-04 5:34 ` Vipin KUMAR
2010-05-04 12:18 ` Tom Rix
2010-05-06 4:11 ` Vipin KUMAR
2010-05-06 22:28 ` Wolfgang Denk
2010-05-02 23:33 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Tom Rix
2010-05-04 3:43 ` Vipin KUMAR
2010-05-02 23:31 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Tom Rix
2010-05-04 1:54 ` Vipin KUMAR
2010-05-02 23:27 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Tom Rix
2010-04-30 11:08 ` [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-30 12:48 ` Tom Rix
2010-05-01 10:09 ` Vipin Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BDE1880.3010201@bumblecow.com \
--to=tom@bumblecow.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox