From: Vipin KUMAR <vipin.kumar@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 17/17] SPEAr : Supporting various configurations for spear3xx and spear6xx boards
Date: Mon, 03 May 2010 13:29:14 +0530 [thread overview]
Message-ID: <4BDE8252.1010502@st.com> (raw)
In-Reply-To: <4BDE1B13.10602@bumblecow.com>
On 5/3/2010 6:08 AM, Tom Rix wrote:
> Vipin KUMAR wrote:
>> spear3xx and 6xx boards can be compiled in following configurations
>> 1. Environment placed in NAND
>> 2. console on usb device
>> 3. console on usb device with environment placed in NAND
>>
>
> Add the new configs to the README.spear
> Tom
>
>
OK. Would be done in patch v3
>
>> Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
>> ---
>> Makefile | 16 ++++++++++++++--
>> board/spear/spear300/config.mk | 11 -----------
>> board/spear/spear310/config.mk | 11 -----------
>> board/spear/spear320/config.mk | 11 -----------
>> board/spear/spear600/config.mk | 11 -----------
>> include/configs/spear3xx.h | 10 ++++++++++
>> include/configs/spear6xx.h | 10 ++++++++++
>> 7 files changed, 34 insertions(+), 46 deletions(-)
>>
>> diff --git a/Makefile b/Makefile
>> index 0b6a151..4cc9913 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -3034,11 +3034,23 @@ smdk2410_config : unconfig
>> @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
>>
>> spear300_config \
>> +spear300_nand_config \
>> +spear300_usbtty_config \
>> +spear300_usbtty_nand_config \
>> spear310_config \
>> -spear320_config : unconfig
>> +spear310_nand_config \
>> +spear310_usbtty_config \
>> +spear310_usbtty_nand_config \
>> +spear320_config \
>> +spear320_nand_config \
>> +spear320_usbtty_config \
>> +spear320_usbtty_nand_config : unconfig
>> @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs
>> $(@:_config=) spear spear
>>
>> -spear600_config : unconfig
>> +spear600_config \
>> +spear600_nand_config \
>> +spear600_usbtty_config \
>> +spear600_usbtty_nand_config : unconfig
>> @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs
>> $(@:_config=) spear spear
>>
>> spear1300_config \
>> diff --git a/board/spear/spear300/config.mk
>> b/board/spear/spear300/config.mk
>> index 35646f2..0bbb40f 100644
>> --- a/board/spear/spear300/config.mk
>> +++ b/board/spear/spear300/config.mk
>> @@ -26,14 +26,3 @@
>> TEXT_BASE = 0x00700000
>>
>> ALL += $(obj)u-boot.img
>> -
>> -# Environment variables in NAND
>> -ifeq ($(ENV),NAND)
>> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
>> -else
>> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
>> -endif
>> -
>> -ifeq ($(CONSOLE),USB)
>> -PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
>> -endif
>> diff --git a/board/spear/spear310/config.mk
>> b/board/spear/spear310/config.mk
>> index cba8436..c8264c3 100644
>> --- a/board/spear/spear310/config.mk
>> +++ b/board/spear/spear310/config.mk
>> @@ -27,18 +27,7 @@ TEXT_BASE = 0x00700000
>>
>> ALL += $(obj)u-boot.img
>>
>> -# Environment variables in NAND
>> -ifeq ($(ENV),NAND)
>> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
>> -else
>> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
>> -endif
>> -
>> # Support parallel flash
>> ifeq ($(FLASH),PNOR)
>> PLATFORM_RELFLAGS += -DCONFIG_FLASH_PNOR
>> endif
>> -
>> -ifeq ($(CONSOLE),USB)
>> -PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
>> -endif
>> diff --git a/board/spear/spear320/config.mk
>> b/board/spear/spear320/config.mk
>> index cba8436..c8264c3 100644
>> --- a/board/spear/spear320/config.mk
>> +++ b/board/spear/spear320/config.mk
>> @@ -27,18 +27,7 @@ TEXT_BASE = 0x00700000
>>
>> ALL += $(obj)u-boot.img
>>
>> -# Environment variables in NAND
>> -ifeq ($(ENV),NAND)
>> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
>> -else
>> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
>> -endif
>> -
>> # Support parallel flash
>> ifeq ($(FLASH),PNOR)
>> PLATFORM_RELFLAGS += -DCONFIG_FLASH_PNOR
>> endif
>> -
>> -ifeq ($(CONSOLE),USB)
>> -PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
>> -endif
>> diff --git a/board/spear/spear600/config.mk
>> b/board/spear/spear600/config.mk
>> index 35646f2..0bbb40f 100644
>> --- a/board/spear/spear600/config.mk
>> +++ b/board/spear/spear600/config.mk
>> @@ -26,14 +26,3 @@
>> TEXT_BASE = 0x00700000
>>
>> ALL += $(obj)u-boot.img
>> -
>> -# Environment variables in NAND
>> -ifeq ($(ENV),NAND)
>> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
>> -else
>> -PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
>> -endif
>> -
>> -ifeq ($(CONSOLE),USB)
>> -PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
>> -endif
>> diff --git a/include/configs/spear3xx.h b/include/configs/spear3xx.h
>> index fde505c..f0c915e 100644
>> --- a/include/configs/spear3xx.h
>> +++ b/include/configs/spear3xx.h
>> @@ -39,6 +39,16 @@
>> #define CONFIG_SPEAR320 1
>> #endif
>>
>> +#if defined(CONFIG_MK_usbtty)
>> +#define CONFIG_SPEAR_USBTTY 1
>> +#endif
>> +
>> +#if defined(CONFIG_MK_nand)
>> +#define CONFIG_ENV_IS_IN_NAND 1
>> +#else
>> +#define CONFIG_ENV_IS_IN_FLASH 1
>> +#endif
>> +
>> #include <configs/spear-common.h>
>>
>> /* Ethernet driver configuration */
>> diff --git a/include/configs/spear6xx.h b/include/configs/spear6xx.h
>> index 2532344..82d24df 100644
>> --- a/include/configs/spear6xx.h
>> +++ b/include/configs/spear6xx.h
>> @@ -30,6 +30,16 @@
>> */
>> #define CONFIG_SPEAR600 1
>>
>> +#if defined(CONFIG_MK_usbtty)
>> +#define CONFIG_SPEAR_USBTTY 1
>> +#endif
>> +
>> +#if defined(CONFIG_MK_nand)
>> +#define CONFIG_ENV_IS_IN_NAND 1
>> +#else
>> +#define CONFIG_ENV_IS_IN_FLASH 1
>> +#endif
>> +
>> #include <configs/spear-common.h>
>>
>> /* Serial Configuration (PL011) */
>
>
next prev parent reply other threads:[~2010-05-03 7:59 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-26 2:56 [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 17/17] SPEAr : Supporting various configurations for spear3xx and spear6xx boards Vipin KUMAR
2010-05-03 0:38 ` Tom Rix
2010-05-03 7:59 ` Vipin KUMAR [this message]
2010-05-03 0:37 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC support added Tom Rix
2010-05-03 8:35 ` Vipin KUMAR
2010-05-03 10:19 ` Tom Rix
2010-05-03 11:17 ` Vipin KUMAR
2010-05-03 0:33 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Tom Rix
2010-05-03 11:14 ` Vipin KUMAR
2010-05-03 0:29 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver " Tom Rix
2010-05-03 0:27 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Tom Rix
2010-04-27 5:08 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Heiko Schocher
2010-05-03 0:25 ` Tom Rix
2010-05-04 9:07 ` Vipin KUMAR
2010-05-04 17:56 ` Scott Wood
2010-05-06 1:44 ` Vipin KUMAR
2010-05-05 21:37 ` Tom Rix
2010-05-06 2:08 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Scott Wood
2010-05-03 0:24 ` Tom Rix
2010-05-04 8:48 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Scott Wood
2010-05-03 0:22 ` Tom Rix
2010-05-04 8:08 ` Vipin KUMAR
2010-05-03 0:14 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Tom Rix
2010-05-04 8:01 ` Vipin KUMAR
2010-05-02 23:49 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Tom Rix
2010-05-04 7:15 ` Vipin KUMAR
2010-05-02 23:48 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Tom Rix
2010-05-04 6:33 ` Vipin KUMAR
2010-05-04 13:14 ` Tom Rix
2010-05-02 23:40 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Tom Rix
2010-05-04 5:57 ` Vipin KUMAR
2010-05-02 23:37 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Tom Rix
2010-05-04 5:50 ` Vipin KUMAR
2010-05-02 23:36 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Tom Rix
2010-05-04 5:34 ` Vipin KUMAR
2010-05-04 12:18 ` Tom Rix
2010-05-06 4:11 ` Vipin KUMAR
2010-05-06 22:28 ` Wolfgang Denk
2010-05-02 23:33 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Tom Rix
2010-05-04 3:43 ` Vipin KUMAR
2010-05-02 23:31 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Tom Rix
2010-05-04 1:54 ` Vipin KUMAR
2010-05-02 23:27 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Tom Rix
2010-04-30 11:08 ` [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-30 12:48 ` Tom Rix
2010-05-01 10:09 ` Vipin Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BDE8252.1010502@st.com \
--to=vipin.kumar@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox