From: Tom Rix <tom@bumblecow.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC support added
Date: Mon, 03 May 2010 05:19:32 -0500 [thread overview]
Message-ID: <4BDEA334.7090900@bumblecow.com> (raw)
In-Reply-To: <4BDE8ADA.3060303@st.com>
Vipin KUMAR wrote:
> On 5/3/2010 6:07 AM, Tom Rix wrote:
>> Vipin KUMAR wrote:
>>> SPEAr1300 SoC support contains basic spear1300 support along with the
>>> usage of following drivers
>>> - serial driver(UART)
>>> - i2c driver
>>> - smi driver
>>> - nand driver(FSMC)
>>> - usbd driver
<snip>
>>> +
>>> +#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
>>> +#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
>>> +
>>> +#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
>> Should be conditional on CONFIG_SPEAR_USBTTY
>> Similar changes for spear3xx and spear6xxx
>>
>
> CONFIG_SPEAR_USBTTY is a special case where tty over usb terminal is
> used for downloading and flashing images.
> usbtty environment variable should normally also be set as cdc_acm to
> make sure that we can switch to tty over usb terminal directly from
> uboot prompt by simply running
> setenv stdout usbtty\; setenv stdin usbtty
>
> So, I am not making it conditional to CONFIG_EXTRA_ENV_USBTTY
>
What I mean is the extra enviroment variable and config's
are dependent on USBD. It usb is not configured, these are
not needed.
Tom
next prev parent reply other threads:[~2010-05-03 10:19 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-26 2:56 [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver support added Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC " Vipin KUMAR
2010-04-26 2:56 ` [U-Boot] [PATCH v2 17/17] SPEAr : Supporting various configurations for spear3xx and spear6xx boards Vipin KUMAR
2010-05-03 0:38 ` Tom Rix
2010-05-03 7:59 ` Vipin KUMAR
2010-05-03 0:37 ` [U-Boot] [PATCH v2 16/17] SPEAr : spear1300 SoC support added Tom Rix
2010-05-03 8:35 ` Vipin KUMAR
2010-05-03 10:19 ` Tom Rix [this message]
2010-05-03 11:17 ` Vipin KUMAR
2010-05-03 0:33 ` [U-Boot] [PATCH v2 15/17] SPEAr : Basic spear1300 architecture " Tom Rix
2010-05-03 11:14 ` Vipin KUMAR
2010-05-03 0:29 ` [U-Boot] [PATCH v2 14/17] SPEAr : USBD driver " Tom Rix
2010-05-03 0:27 ` [U-Boot] [PATCH v2 13/17] SPEAr : smi driver moved completely into drivers/mtd Tom Rix
2010-04-27 5:08 ` [U-Boot] [PATCH v2 12/17] SPEAr : i2c driver moved completely into drivers/i2c Heiko Schocher
2010-05-03 0:25 ` Tom Rix
2010-05-04 9:07 ` Vipin KUMAR
2010-05-04 17:56 ` Scott Wood
2010-05-06 1:44 ` Vipin KUMAR
2010-05-05 21:37 ` Tom Rix
2010-05-06 2:08 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 11/17] SPEAr : Configuring FSMC driver for NAND interface Scott Wood
2010-05-03 0:24 ` Tom Rix
2010-05-04 8:48 ` Vipin KUMAR
2010-04-27 21:09 ` [U-Boot] [PATCH v2 10/17] SPEAr : FSMC driver support added Scott Wood
2010-05-03 0:22 ` Tom Rix
2010-05-04 8:08 ` Vipin KUMAR
2010-05-03 0:14 ` [U-Boot] [PATCH v2 09/17] SPEAr : macb driver support added for spear310 and spear320 Tom Rix
2010-05-04 8:01 ` Vipin KUMAR
2010-05-02 23:49 ` [U-Boot] [PATCH v2 08/17] SPEAr : Network support configured for spear SoCs Tom Rix
2010-05-04 7:15 ` Vipin KUMAR
2010-05-02 23:48 ` [U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added Tom Rix
2010-05-04 6:33 ` Vipin KUMAR
2010-05-04 13:14 ` Tom Rix
2010-05-02 23:40 ` [U-Boot] [PATCH v2 06/17] SPEAr : Basic arch related support added for SPEAr SoCs Tom Rix
2010-05-04 5:57 ` Vipin KUMAR
2010-05-02 23:37 ` [U-Boot] [PATCH v2 05/17] SPEAr : Reducing the max RAM size to 128MB Tom Rix
2010-05-04 5:50 ` Vipin KUMAR
2010-05-02 23:36 ` [U-Boot] [PATCH v2 04/17] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Tom Rix
2010-05-04 5:34 ` Vipin KUMAR
2010-05-04 12:18 ` Tom Rix
2010-05-06 4:11 ` Vipin KUMAR
2010-05-06 22:28 ` Wolfgang Denk
2010-05-02 23:33 ` [U-Boot] [PATCH v2 03/17] SPEAr : SMI erase and write timeouts increased Tom Rix
2010-05-04 3:43 ` Vipin KUMAR
2010-05-02 23:31 ` [U-Boot] [PATCH v2 02/17] change_bit routine defined Tom Rix
2010-05-04 1:54 ` Vipin KUMAR
2010-05-02 23:27 ` [U-Boot] [PATCH v2 01/17] u-boot.img file not created when srctree and objtree are different Tom Rix
2010-04-30 11:08 ` [U-Boot] [PATCH v2 00/17] Network support for spear platform and spear1300 support Vipin KUMAR
2010-04-30 12:48 ` Tom Rix
2010-05-01 10:09 ` Vipin Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BDEA334.7090900@bumblecow.com \
--to=tom@bumblecow.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox