[U-Boot] Support for MB86R01 cpu

["Matthias Weißer" <weisserm@arcor.de>]

Hi Thirumalai

Am 18.05.2010 08:29, schrieb Thirumalai:
> Hi Matthias,
>         I am going to use u-boot alone for my development. Which debugger is 
> suitable for debugging u-boot and initial board bringup activity?
> My choice is BDI2000. Is it ok.

Yes. As I said. But I never used it to debug u-boot together together
with GDB. After the serial console was up I used printf-like debugging.
And before that point I could live quite good with simple BDI commands.

> Also tell me what toolchains need to be used. Is ELDK supports?

I don't know. I used a toolchain which I build myself using
crosstools-ng (see http://freshmeat.net/projects/crosstool-ng/)

> Whether the video driver is available on u-boot ?

Check my patch series and you will see ;-)

Matthias

> -Thirumalai
> 
> ----- Original Message ----- 
> From: "Matthias Wei?er" <weisserm@arcor.de>
> To: "Thirumalai" <thirumalai.p@datapatterns.co.in>
> Cc: <u-boot@lists.denx.de>
> Sent: Tuesday, May 18, 2010 11:18 AM
> Subject: Re: [U-Boot] Support for MB86R01 cpu
> 
> 
>> Hello Thirumalai
>>
>> Am 18.05.2010 07:37, schrieb Thirumalai:
>>> Hi Matthias,
>>>          We are using MB86R01 processor in our design. We just want to 
>>> know
>>> what emulator/debugger can be used for initial board bring-up activity 
>>> and
>>> also whether the latest u-boot(2010.03) is supporting this processor ?
>>
>> I recently posted a patch series adding support for MB86R01 to u-boot. I 
>> did not receive any comments on V2 so I thinks its more or less fine and I 
>> hope it will be merged within the upcoming merge window.
>>
>> See http://lists.denx.de/pipermail/u-boot/2010-May/071097.html for the 
>> initial mail of the patch series.
>>
>> I am using a BDI2000 (http://www.abatron.ch/products/bdi-family.html) for 
>> initial flash programming. A Segger JLink 
>> (http://www.segger.com/cms/jlink.html) works also.
>>
>> Hope this helped.
>>
>> Matthias 
>