From mboxrd@z Thu Jan 1 00:00:00 1970 From: Timur Tabi Date: Fri, 21 May 2010 10:25:59 -0500 Subject: [U-Boot] [PATCH] powerpc: add support for the FreescaleP1022DS reference board In-Reply-To: References: <1274392909-16422-1-git-send-email-timur@freescale.com> Message-ID: <4BF6A607.5000409@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Liu Dave-R63238 wrote: > Did you grab the patch from our latest BSP tree? No, I've been using the ltib patches. I guess I should use the repository on git.ap instead. > It seems like your patch doesn't base on latest upstream tree, IIRC, the > PCI stuff > in mpc8xxx/pci_cfg.c is ready in upstream tree. Ah, I was using the P2020 as a basis, not the 8536. And I see Kumar just posted patches for the P2020. > Did you have a test the patch on V2 board? The V2 board has big change > from V1 > board. Anyway I would like we have sufficient test on V2 board before it > is merged to > main tree. When I power on the board, it says this: Board: P1022DS Sys ID: 0x19, Sys Ver: 0x02, FPGA Ver: 0x04, vBank: 0 How can I tell if I have a rev2 board? There's a sticker that says, "sch-26191 rev b" -- Timur Tabi Linux kernel developer at Freescale