From mboxrd@z Thu Jan  1 00:00:00 1970
From: Steve DeLaney <onramp123@yahoo.com>
Date: Tue, 25 May 2010 07:36:43 -0700
Subject: [U-Boot] building tools/env
Message-ID: <4BFBE07B.7020309@yahoo.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


hi there, I'm attempting to build u-boot 1.1.1 tools/env
and the build is failed.  Any ideas on best way to enable it in the 
build.  Here's what I did so far

first, update tools/Makefile

TOOLSUBDIRS = env

then

top level build
make clobber mrproper
make octeon_cn3010_evb_hs5_config
make all

the build in tools/env fails due to missing include files
linux/mtd/mtd.h
zlib.h

add to tools/env/Makefile

CPPFLAGS += ../../include

and include CPPFLAGS here:

fw_printenv :  $(SOURCES) $(HEADERS)
    $(CROSS_COMPILE)gcc -Wall $(CPPFLAGS) -DUSE_HOSTCC $(SOURCES) -o 
fw_printenv

 but this leads to build error on definitions of uint32_t, phys_addr_t 
and erase_info_t

Any ideas on preferred way to build tools/env?

thanks in advance!