From: Scott McNutt <smcnutt@psyent.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/6 v4] nios2: add gpio support
Date: Tue, 25 May 2010 15:39:35 -0400 [thread overview]
Message-ID: <4BFC2777.3000606@psyent.com> (raw)
In-Reply-To: <1272598458-17946-2-git-send-email-thomas@wytron.com.tw>
Applied to:
git://git.denx.de/u-boot-nios.git next
Thanks,
--Scott
Thomas Chou wrote:
> This patch adds driver for a trivial gpio core, which is described
> in http://nioswiki.com/GPIO. It is used for gpio led and nand flash
> interface in u-boot.
>
> When CONFIG_SYS_GPIO_BASE is not defined, board may provide
> its own driver.
>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> ---
> v4: remove () from gpio when it is not in a macro.
> v3: arch dir reorganized.
>
> arch/nios2/include/asm/gpio.h | 52 +++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 52 insertions(+), 0 deletions(-)
> create mode 100644 arch/nios2/include/asm/gpio.h
>
> diff --git a/arch/nios2/include/asm/gpio.h b/arch/nios2/include/asm/gpio.h
> new file mode 100644
> index 0000000..76c425e
> --- /dev/null
> +++ b/arch/nios2/include/asm/gpio.h
> @@ -0,0 +1,52 @@
> +/*
> + * nios2 gpio driver
> + *
> + * This gpio core is described in http://nioswiki.com/GPIO
> + * bit[0] data
> + * bit[1] output enable
> + *
> + * when CONFIG_SYS_GPIO_BASE is not defined, board may provide
> + * its own driver.
> + *
> + * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _ASM_NIOS2_GPIO_H_
> +#define _ASM_NIOS2_GPIO_H_
> +
> +#ifdef CONFIG_SYS_GPIO_BASE
> +#include <asm/io.h>
> +
> +static inline int gpio_direction_input(unsigned gpio)
> +{
> + writel(1, CONFIG_SYS_GPIO_BASE + (gpio << 2));
> + return 0;
> +}
> +
> +static inline int gpio_direction_output(unsigned gpio, int value)
> +{
> + writel(value ? 3 : 2, CONFIG_SYS_GPIO_BASE + (gpio << 2));
> + return 0;
> +}
> +
> +static inline int gpio_get_value(unsigned gpio)
> +{
> + return readl(CONFIG_SYS_GPIO_BASE + (gpio << 2));
> +}
> +
> +static inline void gpio_set_value(unsigned gpio, int value)
> +{
> + writel(value ? 3 : 2, CONFIG_SYS_GPIO_BASE + (gpio << 2));
> +}
> +#else
> +extern int gpio_direction_input(unsigned gpio);
> +extern int gpio_direction_output(unsigned gpio, int value);
> +extern int gpio_get_value(unsigned gpio);
> +extern void gpio_set_value(unsigned gpio, int value);
> +#endif /* CONFIG_SYS_GPIO_BASE */
> +
> +#endif /* _ASM_NIOS2_GPIO_H_ */
next prev parent reply other threads:[~2010-05-25 19:39 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-27 4:54 [U-Boot] [PATCH] nios2: add gpio based status led driver Thomas Chou
2010-04-20 13:19 ` Scott McNutt
2010-04-20 15:05 ` Thomas Chou
2010-04-20 16:19 ` Scott McNutt
2010-04-21 0:33 ` Thomas Chou
2010-04-21 0:45 ` [U-Boot] [PATCH v2] misc: " Thomas Chou
2010-04-24 19:23 ` Wolfgang Denk
2010-04-24 22:07 ` Thomas Chou
2010-04-24 22:32 ` Wolfgang Denk
2010-04-24 22:59 ` Thomas Chou
2010-04-25 0:48 ` Scott McNutt
2010-04-25 18:15 ` Wolfgang Denk
2010-04-25 18:14 ` Wolfgang Denk
2010-04-28 3:51 ` Thomas Chou
2010-05-04 22:30 ` Wolfgang Denk
2010-05-04 22:53 ` Scott McNutt
2010-05-05 0:09 ` Thomas Chou
2010-04-30 3:34 ` [U-Boot] [PATCH 0/6] add gpio_led and altera_spi drivers Thomas Chou
2010-04-30 3:34 ` [U-Boot] [PATCH 1/6 v4] nios2: add gpio support Thomas Chou
2010-05-21 14:39 ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:39 ` Scott McNutt [this message]
2010-04-30 3:34 ` [U-Boot] [PATCH 2/6 v2] misc: add gpio based status led driver Thomas Chou
2010-05-21 14:40 ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:39 ` [U-Boot] " Scott McNutt
2010-04-30 3:34 ` [U-Boot] [PATCH 3/6 v3] nios2: add gpio support to nios2-generic board Thomas Chou
2010-04-30 14:24 ` Scott McNutt
2010-04-30 15:21 ` Thomas Chou
2010-04-30 15:35 ` Scott McNutt
2010-05-21 14:41 ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:40 ` [U-Boot] " Scott McNutt
2010-04-30 3:34 ` [U-Boot] [PATCH 4/6 v10] spi: add altera spi controller support Thomas Chou
2010-05-21 14:43 ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:40 ` [U-Boot] " Scott McNutt
2010-04-30 3:34 ` [U-Boot] [PATCH 5/6 v2] spi_flash: support old STMicro parts with RES Thomas Chou
2010-04-30 12:48 ` Mike Frysinger
2010-04-30 13:15 ` Thomas Chou
2010-04-30 13:11 ` [U-Boot] [PATCH 5/6 v3] " Thomas Chou
2010-04-30 13:25 ` Mike Frysinger
2010-05-05 7:21 ` Mike Frysinger
2010-05-05 7:34 ` Thomas Chou
2010-05-05 19:57 ` Wolfgang Denk
2010-05-05 21:40 ` Mike Frysinger
2010-05-06 0:20 ` Thomas Chou
2010-04-30 3:34 ` [U-Boot] [PATCH 6/6 v3] nios2: add spi flash support to nios2-generic board Thomas Chou
2010-05-21 14:44 ` [U-Boot] [Nios2-dev] " Ian Abbott
2010-05-25 19:52 ` [U-Boot] " Scott McNutt
2010-04-27 3:29 ` [U-Boot] [PATCH] nios2: add epcs, gpio led and mmc_spi to nios2-generic Thomas Chou
2010-04-28 3:08 ` [U-Boot] [PATCH v2] " Thomas Chou
2010-06-09 4:27 ` [U-Boot] [PATCH v2] misc: add gpio based status led driver Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BFC2777.3000606@psyent.com \
--to=smcnutt@psyent.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox