From mboxrd@z Thu Jan 1 00:00:00 1970 From: Scott McNutt Date: Tue, 25 May 2010 15:39:47 -0400 Subject: [U-Boot] [PATCH 2/6 v2] misc: add gpio based status led driver In-Reply-To: <1272598458-17946-3-git-send-email-thomas@wytron.com.tw> References: <20100425181430.6CF214C04D@gemini.denx.de> <1272598458-17946-3-git-send-email-thomas@wytron.com.tw> Message-ID: <4BFC2783.8030809@psyent.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Applied to: git://git.denx.de/u-boot-nios.git next Thanks, --Scott Thomas Chou wrote: > This patch adds a status led driver followed the GPIO access > conventions of Linux. The led mask is used to specify the gpio pin. > > Signed-off-by: Thomas Chou > --- > v2: moved to drivers/misc. > > drivers/misc/Makefile | 1 + > drivers/misc/gpio_led.c | 30 ++++++++++++++++++++++++++++++ > 2 files changed, 31 insertions(+), 0 deletions(-) > create mode 100644 drivers/misc/gpio_led.c > > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile > index f6df60f..55ff17f 100644 > --- a/drivers/misc/Makefile > +++ b/drivers/misc/Makefile > @@ -28,6 +28,7 @@ LIB := $(obj)libmisc.a > COBJS-$(CONFIG_ALI152X) += ali512x.o > COBJS-$(CONFIG_DS4510) += ds4510.o > COBJS-$(CONFIG_FSL_LAW) += fsl_law.o > +COBJS-$(CONFIG_GPIO_LED) += gpio_led.o > COBJS-$(CONFIG_NS87308) += ns87308.o > COBJS-$(CONFIG_STATUS_LED) += status_led.o > COBJS-$(CONFIG_TWL4030_LED) += twl4030_led.o > diff --git a/drivers/misc/gpio_led.c b/drivers/misc/gpio_led.c > new file mode 100644 > index 0000000..acd6a90 > --- /dev/null > +++ b/drivers/misc/gpio_led.c > @@ -0,0 +1,30 @@ > +/* > + * Status LED driver based on GPIO access conventions of Linux > + * > + * Copyright (C) 2010 Thomas Chou > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > +#include > +#include > + > +/* assume led is active low */ > + > +void __led_init(led_id_t mask, int state) > +{ > + gpio_direction_output(mask, (state == STATUS_LED_ON) ? 0 : 1); > +} > + > +void __led_set(led_id_t mask, int state) > +{ > + gpio_set_value(mask, (state == STATUS_LED_ON) ? 0 : 1); > +} > + > +void __led_toggle(led_id_t mask) > +{ > + gpio_set_value(mask, !gpio_get_value(mask)); > +}