From: Ben Warren <biggerbadderben@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH][Net] Write MAC address automatically on MACB-based boards
Date: Wed, 02 Jun 2010 10:02:05 -0700 [thread overview]
Message-ID: <4C068E8D.3030900@gmail.com> (raw)
In-Reply-To: <201006021144.25730.alexander.stein@systec-electronic.com>
Hi Alexander,
On 6/2/2010 2:44 AM, Alexander Stein wrote:
> Hi Ben,
>
> Am Dienstag, 1. Juni 2010 21:03:51 schrieb Ben Warren:
>
>> Also, remove all calls to eth_init() in boards that use MACB
>>
>> Signed-off-by: Ben Warren<biggerbadderben@gmail.com>
>>
> After cherry-picking ecee9324d73555e744593f3e0d387bec4c566f55 in my v2010.3
> based tree and removing eth_init in reset_phy there is no boot delay due to
> resetting the phy which is done in *_macb_hw_init.
> Also the MAC address is programmed into hardware and doesn't need to be set by
> ifconfig eth0 hw ether ${MAC}
> One side note, but this shouldn't matter at all: I tested this on my own
> board, not on of the boards with in-tree support in u-boot
>
> Tested-by: Alexander Stein<alexander.stein@systec-electronic.com>
>
>
Beautiful! I'm glad this worked out for you. If I don't receive any
negative feedback, this patch will make it into the next release.
> Best regards
> Alexander
>
regards,
Ben
next prev parent reply other threads:[~2010-06-02 17:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-01 19:03 [U-Boot] [PATCH][Net] Write MAC address automatically on MACB-based boards Ben Warren
2010-06-02 9:44 ` Alexander Stein
2010-06-02 17:02 ` Ben Warren [this message]
2010-06-21 6:12 ` Ben Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C068E8D.3030900@gmail.com \
--to=biggerbadderben@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox