[U-Boot] [PATCH 2/2] at91_emac: Write MAC address automatically

[Ben Warren <biggerbadderben@gmail.com>]

Hi Eric,

On 6/15/2010 5:36 AM, Eric B?nard wrote:
> tested on cpuat91.
>
> Signed-off-by: Eric B?nard<eric@eukrea.com>
> ---
>   drivers/net/at91_emac.c |   31 +++++++++++++++++++++++--------
>   1 files changed, 23 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
> index 1ebcf05..ac5903d 100644
> --- a/drivers/net/at91_emac.c
> +++ b/drivers/net/at91_emac.c
> @@ -352,14 +352,6 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd)
>   	writel(1<<  AT91_ID_EMAC,&pmc->pcer);
>   	writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR,&emac->ctl);
>
> -	DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
> -		cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))),
> -		cpu_to_le32(*((u32 *)netdev->enetaddr)));
> -	writel(cpu_to_le32(*((u32 *)netdev->enetaddr)),&emac->sa2l);
> -	writel(cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))),&emac->sa2h);
> -	DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
> -		readl(&emac->sa2h), readl(&emac->sa2l));
> -
>   	/* Init Ethernet buffers */
>   	for (i = 0; i<  RBF_FRAMEMAX; i++) {
>   		dev->rbfdt[i].addr = (unsigned long) NetRxPackets[i];
> @@ -460,6 +452,28 @@ static int at91emac_recv(struct eth_device *netdev)
>   	return 0;
>   }
>
> +static int at91emac_write_hwaddr(struct eth_device *netdev)
> +{
> +	emac_device *dev;
> +	at91_emac_t *emac;
> +	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
> +
> +	if (netdev->enetaddr != 0) {
>    
This check's not necessary.  The caller checks if the MAC address is 
valid ( a more extensive check than you do here)
> +		emac = (at91_emac_t *) netdev->iobase;
> +		dev = (emac_device *) netdev->priv;
> +
> +		writel(1<<  AT91_ID_EMAC,&pmc->pcer);
> +		DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
> +			cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))),
> +			cpu_to_le32(*((u32 *)netdev->enetaddr)));
> +		writel(cpu_to_le32(*((u32 *)netdev->enetaddr)),&emac->sa2l);
> +		writel(cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))),&emac->sa2h);
> +		DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
> +			readl(&emac->sa2h), readl(&emac->sa2l));
> +	}
> +	return 0;
> +}
> +
>   int at91emac_register(bd_t *bis, unsigned long iobase)
>   {
>   	emac_device *emac;
> @@ -492,6 +506,7 @@ int at91emac_register(bd_t *bis, unsigned long iobase)
>   	dev->halt = at91emac_halt;
>   	dev->send = at91emac_send;
>   	dev->recv = at91emac_recv;
> +	dev->write_hwaddr = at91emac_write_hwaddr;
>
>   	eth_register(dev);
>
>    
regards,
Ben