[U-Boot] mpc8343: TSEC1 @ RGMII stopped working

[Felix Radensky <felix@embedded-sol.com>]

Hi Andre,

Andr? Schwarz wrote:
> Kim,
>
> the 2nd TSEC has stopped working on both U-Boot and Linux on our MPC8343
> based system (MVBLM7). Actually I stumbled over this by accident...
>
> TSEC0+1 are using an VSC8601 connected via RGMII.
>
> Since both Bootloader (U-Boot 2010.3) and OS (Linux 2.6.26.27) are
> affected I suspect a configuration problem.
>
> The PHY is working fine according to LED signalling.
>
> mvBL-M7> mii info
> ->TSEC0 unplugged:
> PHY 0x10: OUI = 0x01C1, Model = 0x02, Rev = 0x01,  10baseT, HDX
> ->TSEC1 plugged into GigE Network.
> PHY 0x11: OUI = 0x01C1, Model = 0x02, Rev = 0x01, 100baseT, FDX
> PHY 0x1F: OUI = 0x0000, Model = 0x00, Rev = 0x00,  10baseT, HDX
>
>
> mvBL-M7> set ethact TSEC1
> mvBL-M7> bootp
> Speed: 1000, full duplex
> Random delay: 603 ms...
> BOOTP broadcast 1
> ....
>
>   
I have the same problem on P2020RDB (VSC7385 with RGMII) with TOT u-boot.
The last working version seems to be u-boot-2009.11. Didn't have time to 
git-bisect that yet.

Felix.