From: Armando VISCONTI <armando.visconti@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] SPEAr (ARM) patchset inclusion for u-boot
Date: Tue, 22 Jun 2010 17:30:20 +0200 [thread overview]
Message-ID: <4C20D70C.2050909@st.com> (raw)
In-Reply-To: <AANLkTikOukXy3Ray8G84FAH0jWmeKN8vU32WiOOahZY0@mail.gmail.com>
Tom,
As the patchset has already been acked by the proper people
in the community and since it has been floating around for long
time can you possibly include it in your tree?
Actually we really believe in open source contribution, but I'm
worried that Vipin is getting a little bit frustrated as he doesn't
see the conclusion of his hard work.
THanks for letting us know,
Armando
On 6/22/2010 4:23 PM, Vipin Kumar wrote:
> On Mon, Jun 14, 2010 at 1:42 PM, Vipin KUMAR<vipin.kumar@st.com> wrote:
>
>> On 6/11/2010 11:44 AM, vipink wrote:
>>
>>> Dear Tom, Wolfgang,
>>>
>>> Can you please let me know the status of the remainging patches of this patch-set.
>>> I have not received any reply after sending v3 patch a long time back
>>>
>>>
>> Dear Tom, Wolfgang
>>
>> A gentle reminder
>>
>>
> Dear Tom, Wolfgang
>
> I am still waiting for a reply or the acceptance of the related this
> patch series
>
> Thanks in advance
>
> Regards
> Vipin
>
>> Regards
>> Vipin
>>
>>> These are the Acks I have already received
>>>
>>> SPEAr : Configuring FSMC driver for NAND interface
>>> http://www.mail-archive.com/u-boot at lists.denx.de/msg31656.html
>>> SPEAr : FSMC driver support added
>>> http://www.mail-archive.com/u-boot at lists.denx.de/msg31655.html
>>> SPEAr : i2c driver moved completely into drivers/i2c
>>> http://www.mail-archive.com/u-boot at lists.denx.de/msg31604.html
>>> SPEAr : USB Device Controller driver support added
>>> http://www.mail-archive.com/u-boot at lists.denx.de/msg32362.html
>>> SPEAr : macb driver support added for spear310 and spear320
>>> http://www.mail-archive.com/u-boot at lists.denx.de/msg33153.html
>>> SPEAr : Network support configured for spear SoCs
>>> http://www.mail-archive.com/u-boot at lists.denx.de/msg33152.html
>>>
>>> Thanks in advance
>>>
>>> Regards
>>> Vipin
>>>
>>> On 5/28/2010 10:22 PM, Vipin Kumar wrote:
>>>
>>>> Dear Wolfgang,
>>>>
>>>> This patch-set as been pending for a long time and it seems Tom is also away
>>>> from mails. A few patches have already been Acked by respective device owners
>>>>
>>>> Please let me know how do I get this patch-set included in 2006.06 release
>>>>
>>>> Thanks in advance
>>>> Vipin
>>>>
>>>> On Fri, May 14, 2010 at 8:26 AM, Vipin KUMAR<vipin.kumar@st.com> wrote:
>>>>
>>>>> Dear Tom,
>>>>>
>>>>> I am still waiting for Ack/feedback if any on this patchset v3
>>>>> All feedbacks provided by you on patchset v2 have been incorporated
>>>>>
>>>>> Regards
>>>>> Vipin
>>>>>
>>>>> On 5/9/2010 7:46 PM, Vipin Kumar wrote:
>>>>>
>>>>>> Hello Tom,
>>>>>>
>>>>>> Please consider this patch-set for mainline submission.
>>>>>> Please let me know if there are any changes to be made
>>>>>> in code or if the patches are good to go into mainline
>>>>>>
>>>>>> Thanks& Regards
>>>>>> Vipin
>>>>>>
>>>>>> On Thu, May 6, 2010 at 4:48 PM, Vipin KUMAR<vipin.kumar@st.com> wrote:
>>>>>>
>>>>>>> Hello Tom,
>>>>>>> The following patch-set contains all the accepted feedbacks on patch-set v2.
>>>>>>> Please consider this for submission into mainline
>>>>>>>
>>>>>>> Below changes are introduced other than the recieved review comments
>>>>>>> 1. Introduced a CONFIG_DW_SEARCH_PHY definition, which if defined searches
>>>>>>> the ethernet phy address. Searching was always enabled in earlier patch
>>>>>>> 2. Introduced a new function dw_write_hwaddr in ethernet driver and
>>>>>>> registered it as a callback via dev->write_hwaddr. This is a new feature
>>>>>>> recently implemented by Ben.
>>>>>>>
>>>>>>> Thanks in advance
>>>>>>>
>>>>>>> Regards
>>>>>>> Vipin
>>>>>>>
>>>>>>> Vipin Kumar (19):
>>>>>>> u-boot.img file not created when srctree and objtree are different
>>>>>>> change_bit routine defined
>>>>>>> SPEAr : SMI erase and write timeouts increased
>>>>>>> SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET
>>>>>>> SPEAr : Reducing the max RAM size to 128MB
>>>>>>> SPEAr : Basic arch related support added for SPEAr SoCs
>>>>>>> SPEAr : Network driver support added
>>>>>>> SPEAr : Network support configured for spear SoCs
>>>>>>> SPEAr : macb driver support added for spear310 and spear320
>>>>>>> SPEAr : FSMC driver support added
>>>>>>> SPEAr : Configuring FSMC driver for NAND interface
>>>>>>> SPEAr : i2c driver moved completely into drivers/i2c
>>>>>>> SPEAr : smi driver moved completely into drivers/mtd
>>>>>>> SPEAr : USB Device Controller driver support added
>>>>>>> SPEAr : Supporting various configurations for spear3xx and spear6xx
>>>>>>> boards
>>>>>>> SPEAr : Basic spear1300 architecture support added
>>>>>>> SPEAr : spear1300 SoC support added
>>>>>>> SPEAr : Removing extraneous code
>>>>>>> SPEAr : USB device controller bugfixes
>>>>>>>
>>>>>>> MAINTAINERS | 1 +
>>>>>>> MAKEALL | 1 +
>>>>>>> Makefile | 30 +-
>>>>>>> arch/arm/cpu/arm926ejs/spear/Makefile | 3 +-
>>>>>>> arch/arm/cpu/arm926ejs/spear/cpu.c | 78 +++
>>>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/Makefile | 52 ++
>>>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/cache.S | 114 +++++
>>>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c | 96 ++++
>>>>>>> .../arm_cortexa8/spear13xx/reset.c} | 52 +--
>>>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/timer.c | 138 +++++
>>>>>>> .../arm/include/asm/arch-spear/clk.h | 26 +-
>>>>>>> arch/arm/include/asm/arch-spear/hardware.h | 16 +-
>>>>>>> arch/arm/include/asm/arch-spear/spr_misc.h | 5 +
>>>>>>> .../arm/include/asm/arch-spear13xx/hardware.h | 33 +-
>>>>>>> arch/arm/include/asm/arch-spear13xx/spr_gpt.h | 85 ++++
>>>>>>> arch/arm/include/asm/arch-spear13xx/spr_misc.h | 317 ++++++++++++
>>>>>>> .../arm/include/asm/arch-spear13xx/sys_proto.h | 29 +-
>>>>>>> arch/arm/include/asm/bitops.h | 11 +-
>>>>>>> board/spear/common/Makefile | 10 +-
>>>>>>> board/spear/common/spr_misc.c | 28 +-
>>>>>>> board/spear/spear1300/Makefile | 51 ++
>>>>>>> board/spear/spear1300/config.mk | 28 +
>>>>>>> board/spear/spear1300/spear1300.c | 88 ++++
>>>>>>> .../spear/spear1300/spr_lowlevel_init.S | 35 +-
>>>>>>> board/spear/spear300/config.mk | 11 -
>>>>>>> board/spear/spear300/spear300.c | 15 +-
>>>>>>> board/spear/spear310/config.mk | 11 -
>>>>>>> board/spear/spear310/spear310.c | 36 ++-
>>>>>>> board/spear/spear320/config.mk | 11 -
>>>>>>> board/spear/spear320/spear320.c | 23 +-
>>>>>>> board/spear/spear600/config.mk | 11 -
>>>>>>> board/spear/spear600/spear600.c | 15 +-
>>>>>>> doc/README.designware_eth | 25 +
>>>>>>> doc/README.spear | 46 ++-
>>>>>>> drivers/i2c/Makefile | 2 +-
>>>>>>> drivers/i2c/{spr_i2c.c => designware_i2c.c} | 4 +-
>>>>>>> .../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +-
>>>>>>> drivers/mtd/Makefile | 2 +-
>>>>>>> drivers/mtd/nand/Makefile | 2 +-
>>>>>>> drivers/mtd/nand/fsmc_nand.c | 366 ++++++++++++++
>>>>>>> drivers/mtd/nand/spr_nand.c | 124 -----
>>>>>>> drivers/mtd/{spr_smi.c => st_smi.c} | 59 ++-
>>>>>>> .../arch-spear/spr_smi.h => drivers/mtd/st_smi.h | 8 +-
>>>>>>> drivers/net/Makefile | 1 +
>>>>>>> drivers/net/designware.c | 531 ++++++++++++++++++++
>>>>>>> drivers/net/designware.h | 264 ++++++++++
>>>>>>> drivers/serial/usbtty.h | 4 +-
>>>>>>> drivers/usb/gadget/Makefile | 2 +-
>>>>>>> drivers/usb/gadget/{spr_udc.c => designware_udc.c} | 116 +++--
>>>>>>> include/configs/spear-common.h | 33 +-
>>>>>>> include/configs/spear13xx_evb.h | 202 ++++++++
>>>>>>> include/configs/{spear3xx.h => spear3xx_evb.h} | 30 ++
>>>>>>> include/configs/{spear6xx.h => spear6xx_evb.h} | 13 +
>>>>>>> include/linux/mtd/fsmc_nand.h | 104 ++++
>>>>>>> include/netdev.h | 1 +
>>>>>>> include/usb/{spr_udc.h => designware_udc.h} | 6 +-
>>>>>>> 56 files changed, 2993 insertions(+), 418 deletions(-)
>>>>>>> create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
>>>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/Makefile
>>>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cache.S
>>>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c
>>>>>>> rename arch/arm/{include/asm/arch-spear/spr_nand.h => cpu/arm_cortexa8/spear13xx/reset.c} (50%)
>>>>>>> mode change 100644 => 100755
>>>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/timer.c
>>>>>>> copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear/clk.h (64%)
>>>>>>> copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/hardware.h (58%)
>>>>>>> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_gpt.h
>>>>>>> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_misc.h
>>>>>>> copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/sys_proto.h (64%)
>>>>>>> create mode 100644 board/spear/spear1300/Makefile
>>>>>>> create mode 100644 board/spear/spear1300/config.mk
>>>>>>> create mode 100644 board/spear/spear1300/spear1300.c
>>>>>>> copy include/configs/spear6xx.h => board/spear/spear1300/spr_lowlevel_init.S (56%)
>>>>>>> create mode 100644 doc/README.designware_eth
>>>>>>> rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (98%)
>>>>>>> rename arch/arm/include/asm/arch-spear/spr_i2c.h => drivers/i2c/designware_i2c.h (98%)
>>>>>>> create mode 100644 drivers/mtd/nand/fsmc_nand.c
>>>>>>> delete mode 100644 drivers/mtd/nand/spr_nand.c
>>>>>>> rename drivers/mtd/{spr_smi.c => st_smi.c} (94%)
>>>>>>> rename arch/arm/include/asm/arch-spear/spr_smi.h => drivers/mtd/st_smi.h (96%)
>>>>>>> create mode 100644 drivers/net/designware.c
>>>>>>> create mode 100644 drivers/net/designware.h
>>>>>>> rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (91%)
>>>>>>> create mode 100644 include/configs/spear13xx_evb.h
>>>>>>> rename include/configs/{spear3xx.h => spear3xx_evb.h} (85%)
>>>>>>> rename include/configs/{spear6xx.h => spear6xx_evb.h} (82%)
>>>>>>> create mode 100644 include/linux/mtd/fsmc_nand.h
>>>>>>> rename include/usb/{spr_udc.h => designware_udc.h} (98%)
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> U-Boot mailing list
>>>>>>> U-Boot at lists.denx.de
>>>>>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
--
-- "Every step appears to be the unavoidable consequence of the
-- preceding one." (A. Einstein)
--
Armando Visconti Mobile: (+39) 346 8879146
Senior SW Engineer Fax: (+39) 02 93519290
CPG Work: (+39) 02 93519683
Computer System Division e-mail: armando.visconti at st.com
ST Microelectronics TINA: 051 4683
next prev parent reply other threads:[~2010-06-22 15:30 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-06 11:18 [U-Boot] [PATCH v3 00/19] SPEAr : Network support for spear platforms and SPEAr1300 Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 01/19] u-boot.img file not created when srctree and objtree are different Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 02/19] change_bit routine defined Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 03/19] SPEAr : SMI erase and write timeouts increased Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 04/19] SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 05/19] SPEAr : Reducing the max RAM size to 128MB Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 06/19] SPEAr : Basic arch related support added for SPEAr SoCs Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 07/19] SPEAr : Network driver support added Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 08/19] SPEAr : Network support configured for spear SoCs Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 09/19] SPEAr : macb driver support added for spear310 and spear320 Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 10/19] SPEAr : FSMC driver support added Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 11/19] SPEAr : Configuring FSMC driver for NAND interface Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 12/19] SPEAr : i2c driver moved completely into drivers/i2c Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 13/19] SPEAr : smi driver moved completely into drivers/mtd Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 14/19] SPEAr : USB Device Controller driver support added Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 15/19] SPEAr : Supporting various configurations for spear3xx and spear6xx boards Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 16/19] SPEAr : Basic spear1300 architecture support added Vipin KUMAR
2010-05-06 11:18 ` [U-Boot] [PATCH v3 17/19] SPEAr : spear1300 SoC " Vipin KUMAR
2010-05-06 11:19 ` [U-Boot] [PATCH v3 18/19] SPEAr : Removing extraneous code Vipin KUMAR
2010-05-06 11:19 ` [U-Boot] [PATCH v3 19/19] SPEAr : USB device controller bugfixes Vipin KUMAR
2010-05-14 8:44 ` Remy Bohmer
2010-05-14 8:43 ` [U-Boot] [PATCH v3 14/19] SPEAr : USB Device Controller driver support added Remy Bohmer
2010-05-10 20:20 ` [U-Boot] [PATCH v3 08/19] SPEAr : Network support configured for spear SoCs Ben Warren
2010-05-09 14:16 ` [U-Boot] [PATCH v3 00/19] SPEAr : Network support for spear platforms and SPEAr1300 Vipin Kumar
2010-05-14 2:56 ` Vipin KUMAR
2010-05-28 16:52 ` Vipin Kumar
2010-05-28 20:31 ` Ben Warren
2010-06-03 11:55 ` Vipin KUMAR
2010-06-11 6:14 ` Vipin KUMAR
2010-06-14 8:12 ` Vipin KUMAR
2010-06-22 14:23 ` Vipin Kumar
2010-06-22 15:30 ` Armando VISCONTI [this message]
2010-06-22 20:30 ` [U-Boot] SPEAr (ARM) patchset inclusion for u-boot Wolfgang Denk
2010-06-22 20:45 ` Armando VISCONTI
2010-06-23 3:31 ` Vipin KUMAR
2010-06-25 17:53 ` Armando VISCONTI
2010-05-25 10:27 ` [U-Boot] [PATCH v3 00/19] SPEAr : Network support for spear platforms and SPEAr1300 Shiraz HASHIM
2010-05-25 11:03 ` Shiraz HASHIM
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C20D70C.2050909@st.com \
--to=armando.visconti@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox