[U-Boot] Compiling U-Boot for OMAP 3530 Thunder with network support

[U-Boot] Compiling U-Boot for OMAP 3530 Thunder with network support

[cactus.fossil at googlemail.com]

How do I compile U-Boot for the OMAP 3530 Thunder board with network 
support? The latest official U-Boot tarball seems to lack the 
omap3_thunder_config option, which is included in the TechNexion 
release. But even using the latter release, how do I configure network 
(NFS, TFTP) support for the SMSC 9500 USB/Ethernet controller?

Thank you for any help.

Alex

[U-Boot] Compiling U-Boot for OMAP 3530 Thunder with network support

[Wolfgang Denk]

Dear cactus.fossil at googlemail.com,

In message <4C230BB0.4040109@googlemail.com> you wrote:
> How do I compile U-Boot for the OMAP 3530 Thunder board with network 
> support? The latest official U-Boot tarball seems to lack the 
> omap3_thunder_config option, which is included in the TechNexion 
> release. But even using the latter release, how do I configure network 
> (NFS, TFTP) support for the SMSC 9500 USB/Ethernet controller?

Unfortunately TechNexion never submitted any of their work upstream
for inclusion into the mainline repository (not for U-Boot, and
neither for the Linux kernel).

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Extended Epstein-Heisenberg Principle: In an R & D orbit, only  2  of
the  existing 3 parameters can be defined simultaneously. The parame-
ters are: task, time and resources ($).