From: Ilya Yanok <yanok@emcraft.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale
Date: Thu, 24 Jun 2010 19:59:13 +0400 [thread overview]
Message-ID: <4C2380D1.3000900@emcraft.com> (raw)
In-Reply-To: <20100622191705.c9fcf0fb.kim.phillips@freescale.com>
Dear Kim,
On 23.06.2010 04:17, Kim Phillips wrote:
>> +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
>> + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
>>
> | HID0_ENABLE_INSTRUCTION_CACHE?
>
I've enabled icache and now the board sometimes resets twice after
U-Boot 'reset' command:
=> re
Resetting the board.
U-Boot 2010.06-rc3-00020-g093a164 (Jun 24 2010 - 17:45:17) MPC83XX
Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
CPU: e300c3, MPC8308, Rev: 1.0 at 400 MHz, CSB: 133.333 MHz
Board: Freescale MPC8308ERDB Rev 1.0
I2C: ready
DRAM:
U-Boot 2010.06-rc3-00020-g093a164 (Jun 24 2010 - 17:45:17) MPC83XX
Reset Status: External/Internal Soft, External/Internal Hard
CPU: e300c3, MPC8308, Rev: 1.0 at 400 MHz, CSB: 133.333 MHz
Board: Freescale MPC8308ERDB Rev 1.0
I2C: ready
DRAM: 128 MiB
FLASH: 8 MiB
PCIE0: link
In: serial
Out: serial
Err: serial
Net: eTSEC1: No support for PHY id ffffffff; assuming generic
eTSEC0, eTSEC1
Hit any key to stop autoboot: 0
=>
(It doesn't always stop at "DRAM:" line but that position is most frequent)
Maybe you have some ideas on this subject?
Regards, Ilya.
next prev parent reply other threads:[~2010-06-24 15:59 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-20 17:32 [U-Boot] [PATCH 0/2] Support for MPC8308ERDB board Ilya Yanok
2010-06-20 17:32 ` [U-Boot] [PATCH 1/2] mpc8308: support for Freescale MPC8308 cpu Ilya Yanok
2010-06-21 7:44 ` Wolfgang Denk
2010-06-21 11:41 ` Ilya Yanok
2010-06-22 16:11 ` Wolfgang Denk
2010-06-28 12:44 ` Ilya Yanok
2010-07-09 21:13 ` Kim Phillips
2010-06-20 17:32 ` [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale Ilya Yanok
2010-06-21 7:44 ` Wolfgang Denk
2010-06-21 12:25 ` Ilya Yanok
2010-06-22 18:14 ` Wolfgang Denk
2010-06-22 19:10 ` Ben Warren
2010-06-23 12:01 ` Ilya Yanok
2010-06-23 11:57 ` Ilya Yanok
2010-06-23 0:17 ` Kim Phillips
2010-06-23 21:30 ` Ilya Yanok
2010-06-23 22:08 ` Wolfgang Denk
2010-06-24 15:59 ` Ilya Yanok [this message]
2010-06-24 18:00 ` Kim Phillips
2010-06-24 19:36 ` Ilya Yanok
2010-06-25 1:25 ` Aggrwal Poonam-B10812
[not found] ` <20100624190054.847e4452.kim.phillips@freescale.com>
2010-07-20 0:33 ` Kim Phillips
2010-07-20 5:46 ` Wolfgang Denk
2010-07-20 15:08 ` Ilya Yanok
2010-08-10 16:32 ` [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale (ICache issue) Ilya Yanok
2010-06-28 12:45 ` [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale Ilya Yanok
2010-07-01 0:30 ` Kim Phillips
2010-07-01 9:13 ` Ilya Yanok
2010-07-07 16:16 ` [U-Boot] [PATCH 2/2] MPC8308RDB: " Ilya Yanok
2010-07-09 21:14 ` Kim Phillips
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C2380D1.3000900@emcraft.com \
--to=yanok@emcraft.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox