From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Thu, 01 Jul 2010 14:21:10 +0200
Subject: [U-Boot] MX31PDK not booting with U-boot v2010.06
In-Reply-To: <4C2B9BC5.2020500@gmail.com>
References: <4C2B9BC5.2020500@gmail.com>
Message-ID: <4C2C8836.2060101@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Magnus Lilja wrote:
> Hi all,
> 

Hi Magnus,

> 
> Has anyone tried the latest release on the i.MX31 PDK board? I
> downloaded it on my board, using U-boot v2010.03-rc1 to download and
> update U-boot, and after a reset it doesn't start. Since I don't have
> a debugger right now I don't know more than that. I'll get my hands
> on one and re-flash the board.
> 
> As I mentioned, v2010.03-rc1 worked. I haven't tried any versions
> after that. v2010.06 seems to work on the i.MX31 Litekit board
> (Litekit boots from NOR, PDK boots from NAND).

I do not have a MX.31 board booting from NAND, I could only test on
another board (qong) booting from NOR and I can at least confirm you
there are no problems. It seems you cannot avoit to use the debugger to
get some more info...

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================