From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Thu, 01 Jul 2010 15:53:44 +0200 Subject: [U-Boot] Need Help in bulding U-boot-2010-06 for OpenRD client In-Reply-To: References: Message-ID: <4C2C9DE8.2080806@free.fr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Le 01/07/2010 15:44, kalyan karnati a ?crit : > Hello, > > I'm trying to build uboot.bin for Marvell OpenRD client from uboot-2010-06 > source file. > I noticed that there is no config file for OpenRD_client. So I compiled > openrd_base and sent the binary to the board using OpenOCD. But the board > doesn't even boot. > Can you please let me know if there is another board config specific to > OpenRD_Client or am I missing something ?? > > Thanks for you help, > > Best Regards, > Kalyan. Hi Kalyan, I've successfully used the base config for a client board, as well as used a patch recently sent to this list that adds client and ultimate support. You can search the list for 'ultimate' for instance: http://lists.denx.de/mailman/listinfo/u-boot Re: your issue, can you detail exactly how you load and run u-boot via openocd? What operations do you perform on the board, and what commands do you issue on your debugging host to launch openocd? Amicalement, -- Albert.