From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dirk Behme <dirk.behme@googlemail.com>
Date: Wed, 07 Jul 2010 17:07:00 +0200
Subject: [U-Boot] Usage of bi_env ?
Message-ID: <4C349814.2000804@googlemail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

With U-Boot 2010.03 on an ARM board, the output of 'bdinfo' command gives:

...
env_t = 0x00000000
...

The code in common/cmd_bdinfo.c for this is

bd_t *bd = gd->bd;
...
print_num ("env_t", (ulong)bd->bi_env);

While checking if 0 for this value is correct or not, it looks to me 
that bi_env isn't set anywhere and is unused [1]. And it looks like 
bi_env is printed only in the ARM version of bdinfo. Do I miss 
anything here?

Best regards

Dirk

[1] grep for bi_env in 2010.03:

./include/asm-i386/u-boot.h:54: struct environment_s           *bi_env;
./include/asm-i386/u-boot.h:62:#define bi_env_data bi_env->data
./include/asm-i386/u-boot.h:63:#define bi_env_crc  bi_env->crc
./include/asm-arm/u-boot.h:42:    struct environment_s         *bi_env;
./include/asm-arm/u-boot.h:52:#define bi_env_data bi_env->data
./include/asm-arm/u-boot.h:53:#define bi_env_crc  bi_env->crc
./include/asm-mips/u-boot.h:45:#define bi_env_data bi_env->data
./include/asm-mips/u-boot.h:46:#define bi_env_crc  bi_env->crc
./include/asm-avr32/u-boot.h:29:        struct environment_s    *bi_env;
./common/cmd_bdinfo.c:328:      print_num ("env_t", (ulong)bd->bi_env);