From: Ben Warren <biggerbadderben@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 24/35] Blackfin: bf518f-ezbrd: handle different PHYs dynamically
Date: Sun, 11 Jul 2010 23:55:36 -0700 [thread overview]
Message-ID: <4C3ABC68.9000003@gmail.com> (raw)
In-Reply-To: <4C3ABBDC.1070004@gmail.com>
On 7/11/2010 11:53 PM, Ben Warren wrote:
> Hi Mike,
>
> On 7/5/2010 2:30 AM, Mike Frysinger wrote:
>> The original BF518F-EZBRD's have a Micrel KSZ8893 DSA on them, but newer
>> ones only have a National PHY (which lack a RX Error interrupt
>> line). So
>> in the board eth init code, dynamically detect what is hooked up to
>> the MAC
>> and handle each accordingly.
>>
>> Signed-off-by: Mike Frysinger<vapier@gentoo.org>
>> ---
>> board/bf518f-ezbrd/bf518f-ezbrd.c | 23 +++++++++++++----------
>> include/configs/bf518f-ezbrd.h | 20 ++++++++++++++++++++
>> 2 files changed, 33 insertions(+), 10 deletions(-)
> Applied to net repo.
>
> thanks,
> Ben
On second thought, it probably makes more sense to keep this as part of
your patchset. I shouldn't have pulled it in the first place since it's
really board code.
regards,
Ben
next prev parent reply other threads:[~2010-07-12 6:55 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-05 9:30 [U-Boot] [PATCH 00/35] Blackfin updates for 2010.09 Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 01/35] Blackfin: clean up trace buffer handling when crashing Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 02/35] Blackfin: implement bootcount support Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 03/35] Blackfin: expand EVT1 usage documentation a bit more Mike Frysinger
2010-07-06 21:04 ` Aldo Cedillo
2010-07-05 9:30 ` [U-Boot] [PATCH 04/35] Blackfin: bf537-stamp: drop old spi_flash driver Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 05/35] Blackfin: update anomaly lists to latest sheets Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 06/35] Blackfin: set up simple NMI handlers for anomaly 05000219 Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 07/35] Blackfin: ibf-dsp561: enable AX88180 net driver Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 08/35] Blackfin: import gpio/portmux layer from Linux Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 09/35] Blackfin: unify custom gpio commands Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 10/35] Blackfin: back out status_led.h stubs Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 11/35] Blackfin: switch to common GPIO LED driver Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 12/35] Blackfin: bf537-stamp: use common spi boot workaround code Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 13/35] Blackfin: convert gpio flash logic to common gpio layer Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 14/35] Blackfin: bfin_mac: convert to portmux framework Mike Frysinger
2010-07-12 6:52 ` Ben Warren
2010-07-12 6:56 ` Ben Warren
2010-07-13 21:49 ` Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 15/35] Blackfin: bfin_nand: " Mike Frysinger
2010-07-06 18:33 ` Scott Wood
2010-07-05 9:30 ` [U-Boot] [PATCH 16/35] Blackfin: bfin_sdh: " Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 17/35] Blackfin: pata_bfin: " Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 18/35] Blackfin: serial: " Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 19/35] Blackfin: bfin_spi: " Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 20/35] Blackfin: bfin_spi: support gpios as chip selects Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 21/35] Blackfin: bf533-stamp: convert eth/flash swap logic to gpio framework Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 22/35] Blackfin: blackstamp: " Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 23/35] Blackfin: bf533-stamp: scrub unused code Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 24/35] Blackfin: bf518f-ezbrd: handle different PHYs dynamically Mike Frysinger
2010-07-12 6:53 ` Ben Warren
2010-07-12 6:55 ` Ben Warren [this message]
2010-07-05 9:30 ` [U-Boot] [PATCH 25/35] Blackfin: bf518f-ezbrd: convert to portmux framework Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 26/35] Blackfin: bf548-ezkit: " Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 27/35] Blackfin: bf527-ezkit: " Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 28/35] Blackfin: cm-bf548: " Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 29/35] Blackfin: bf561: use DMA for Core B L1 regions Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 30/35] Blackfin: unify default I2C settings for ADI boards Mike Frysinger
2010-07-06 4:47 ` Heiko Schocher
2010-07-05 9:30 ` [U-Boot] [PATCH 31/35] Blackfin: bfin_mac: remove space from name Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 32/35] Blackfin: enable IP defrag for ADI boards Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 33/35] Blackfin: bf527-ad7160-eval: new board support Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 34/35] Blackfin: drop old u-boot.lds clean target Mike Frysinger
2010-07-05 9:30 ` [U-Boot] [PATCH 35/35] Blackfin: bf561-acvilon: drop unused env redund define Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C3ABC68.9000003@gmail.com \
--to=biggerbadderben@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox