From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rogan Dawes <rogan@dawes.za.net>
Date: Tue, 13 Jul 2010 16:10:04 +0200
Subject: [U-Boot] Error detecting CFI-compliant NOR flash on Orion5x
	(DNS323)
In-Reply-To: <4C3859FB.9020400@dawes.za.net>
References: <4C3859FB.9020400@dawes.za.net>
Message-ID: <4C3C73BC.5020804@dawes.za.net>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 2010/07/10 1:31 PM, Rogan Dawes wrote:
> Hi folks,
>
> I am trying to get a recent U-Boot working on my DNS323 (B1). Building
> on the work of Albert Aribaud, I have been able to get it to boot
> successfully from the existing U-Boot boot loader having defined
> CONFIG_SKIP_LOWLEVEL_INIT, and (with a tweak to the
> ORION5X_DEFADR_BOOTROM and ORION5X_DEFSZ_BOOTROM defines to match my
> flash base address and size) have been able to trigger the flash to
> enter the CFI QRY mode.
>
> However, the standard flash_detect_cfi routine in
> drivers/mtd/cfi_flash.c is unable to detect my flash.
>
> This is what I am currently able to do:
>
> DNS323B1> mw.b 0xff8000aa 0x98
> DNS323B1> md.b 0xff800020 0x40
> ff800020: 51 51 52 52 59 59 02 02 00 00 40 40 00 00 00 00 QQRRYY....@@....
> ff800030: 00 00 00 00 00 00 27 27 36 36 00 00 00 00 04 04 ......''66......
> ff800040: 00 00 0a 0a 00 00 05 05 00 00 04 04 00 00 17 17 ................
> ff800050: 02 02 00 00 00 00 00 00 02 02 07 07 00 00 20 20 ..............
>
> As you can see, the QRY response which is supposed to be at 0x20-0x22 is
> actually duplicated as QQRRYY at 0x20-0x25.
>
> The flash part is a 8 MB Spansion S29GL064M90TFIR4, and the data sheet
> can be found at:
>
> http://www.spansion.com/Support/Datasheets/s29gl-m_00_b8_e.pdf
>
> Here is the output of a boot run, with DEBUG defined in flash.c:
>
> -----x8-----x8-----
> Starting kernel ...
>
>
>
> U-Boot 2010.06-00074-gc63cbcc-dirty (Jul 10 2010 - 13:04:52)DNS323_B1
>
> SoC: Orion5x MV88F5182-A2
> DRAM: 64 MiB
> flash detect cfi
> fwc addr ff800000 cmd f0 f0f0 16bit x 8 bit
> fwc addr ff800000 cmd ff ffff 16bit x 8 bit
> fwc addr ff8000aa cmd 98 9898 16bit x 8 bit
> is= cmd 51(Q) addr ff800020 is= ffff 5151
> fwc addr ff800aaa cmd 98 9898 16bit x 8 bit
> is= cmd 51(Q) addr ff800020 is= ffff 5151
> fwc addr ff800000 cmd f0 00f0 16bit x 16 bit
> fwc addr ff800000 cmd ff 00ff 16bit x 16 bit
> fwc addr ff8000aa cmd 98 0098 16bit x 16 bit
> is= cmd 51(Q) addr ff800020 is= ffff 0051
> fwc addr ff800aaa cmd 98 0098 16bit x 16 bit
> is= cmd 51(Q) addr ff800020 is= ffff 0051
> fwc addr ff800000 cmd f0 f0f0f0f0 32bit x 8 bit
> fwc addr ff800000 cmd ff ffffffff 32bit x 8 bit
> fwc addr ff800154 cmd 98 98989898 32bit x 8 bit
> is= cmd 51(Q) addr ff800040 is= ffffffff 51515151
> fwc addr ff801554 cmd 98 98989898 32bit x 8 bit
> is= cmd 51(Q) addr ff800040 is= ffffffff 51515151
> fwc addr ff800000 cmd f0 00f000f0 32bit x 16 bit
> fwc addr ff800000 cmd ff 00ff00ff 32bit x 16 bit
> fwc addr ff800154 cmd 98 00980098 32bit x 16 bit
> is= cmd 51(Q) addr ff800040 is= ffffffff 00510051
> fwc addr ff801554 cmd 98 00980098 32bit x 16 bit
> is= cmd 51(Q) addr ff800040 is= ffffffff 00510051
> fwc addr ff800000 cmd f0 000000f0 32bit x 32 bit
> fwc addr ff800000 cmd ff 000000ff 32bit x 32 bit
> fwc addr ff800154 cmd 98 00000098 32bit x 32 bit
> is= cmd 51(Q) addr ff800040 is= ffffffff 00000051
> fwc addr ff801554 cmd 98 00000098 32bit x 32 bit
> is= cmd 51(Q) addr ff800040 is= ffffffff 00000051
> fwrite addr ff800000 cmd f0 f0f0f0f0f0f0f0f0 64 bit x 8 bit
> fwrite addr ff800000 cmd ff ffffffffffffffff 64 bit x 8 bit
> fwrite addr ff8002a8 cmd 98 9898989898989898 64 bit x 8 bit
> is= cmd 51(Q) addr ff800080 is= ffffffffffffffff 5151515151515151
> fwrite addr ff802aa8 cmd 98 9898989898989898 64 bit x 8 bit
> is= cmd 51(Q) addr ff800080 is= ffffffffffffffff 5151515151515151
> fwrite addr ff800000 cmd f0 f000f000f000f000 64 bit x 16 bit
> fwrite addr ff800000 cmd ff ff00ff00ff00ff00 64 bit x 16 bit
> fwrite addr ff8002a8 cmd 98 9800980098009800 64 bit x 16 bit
> is= cmd 51(Q) addr ff800080 is= ffffffffffffffff 5100510051005100
> fwrite addr ff802aa8 cmd 98 9800980098009800 64 bit x 16 bit
> is= cmd 51(Q) addr ff800080 is= ffffffffffffffff 5100510051005100
> fwrite addr ff800000 cmd f0 f0000000f0000000 64 bit x 32 bit
> fwrite addr ff800000 cmd ff ff000000ff000000 64 bit x 32 bit
> fwrite addr ff8002a8 cmd 98 9800000098000000 64 bit x 32 bit
> is= cmd 51(Q) addr ff800080 is= ffffffffffffffff 5100000051000000
> fwrite addr ff802aa8 cmd 98 9800000098000000 64 bit x 32 bit
> is= cmd 51(Q) addr ff800080 is= ffffffffffffffff 5100000051000000
> fwrite addr ff800000 cmd f0 f000000000000000 64 bit x 64 bit
> fwrite addr ff800000 cmd ff ff00000000000000 64 bit x 64 bit
> fwrite addr ff8002a8 cmd 98 9800000000000000 64 bit x 64 bit
> is= cmd 51(Q) addr ff800080 is= ffffffffffffffff 5100000000000000
> fwrite addr ff802aa8 cmd 98 9800000000000000 64 bit x 64 bit
> is= cmd 51(Q) addr ff800080 is= ffffffffffffffff 5100000000000000
> not found
> ## Unknown FLASH on Bank 1 (ff800000) - Size = 0x00000000 = 0 MB
> Flash: 0 Bytes
> *** Warning - bad CRC, using default environment
>
> In: serial
> Out: serial
> Err: serial
> DNS323B1>
>
> -----x8-----x8-----
>
> I have tried defining the flash as a 16-bit part with:
>
> #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
>
> (which was used to generate the above bootlog), as well as 8-bit
> (omitting that define), and neither is able to detect the flash part.
>
> It seems that it is a mixed 8/16 bit device, and the current u-boot code
> does not support that very well. Either that, or I have not found the
> right defines.
>
> If anyone has any ideas of what I am doing wrong, or what I should do to
> debug this further, please do let me know.
>
> My current diff against mainline u-boot is included as an attachment (I
> know, sorry, but Thunderbird tends to mangle inline patches). Please
> ignore board_flash_get_legacy in board/Marvell/dns323_b1/dns323_b1.c, I
> do not define CONFIG_FLASH_CFI_LEGACY. This is just in case there is no
> alternative solution via the standard CFI routines, and is a pure copy
> and paste from the edminiv2 code.
>
> Regards,
>
> Rogan

Does nobody have any ideas that I can try to successfully recognize and 
access my flash?

Rogan