From: Karl Krach <mailinglists@blueSpirit.la>
To: u-boot@lists.denx.de
Subject: [U-Boot] ubifsmount fails after booting linux
Date: Thu, 15 Jul 2010 21:32:06 +0200 [thread overview]
Message-ID: <4C3F6236.4030809@blueSpirit.la> (raw)
In-Reply-To: <l5aqo5.mcr3zo@webmail.variomedia.de>
On 07/09/2010 05:21 PM, Karl Krach wrote:
> Hello,
>
Just for documentation:
U-boot/mtdparts detected only the first 512Mb of the dual component
flash chip while Linux (through the device tree) used the full 1024Mb.
It seems that mounting a 1024Mb mtd device, which was created as 512Mb
partition works better, than mounting a 512Mb mtd device which was
mounted as 1024Mb before.
Charly
>
> Problem: After booting linux once, I cannot mount my ubifs from uboot any
> more. (But: On linux it is still working fine...)
>
> I receive once again:
> UBIFS error (pid 0): ubifs_read_node: bad node type
> (255 but expected 6)
> UBIFS error (pid 0): ubifs_read_node: bad node at LEB 0:0
> Error reading superblock on volume 'ubi:rootfs'!
>
prev parent reply other threads:[~2010-07-15 19:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-09 15:21 [U-Boot] ubifsmount fails after booting linux Karl Krach
2010-07-15 19:32 ` Karl Krach [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C3F6236.4030809@blueSpirit.la \
--to=mailinglists@bluespirit.la \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox