[U-Boot] [PATCH 2/2 v3] 8xx, kup4: add FDT support

[U-Boot] [PATCH 2/2 v3] 8xx, kup4: add FDT support

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs@denx.de>

---
- changes since v1
  - rebased against current mainline
  - fix printf output

- changes since v2
  added comments from Scott Wood
  removed ft_blob_update() complete, because fixups are done in
  cpu specific code.

 board/kup/kup4k/kup4k.c |   11 +++++++++++
 include/configs/KUP4K.h |    4 ++++
 2 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
index 7eb36ab..267821c 100644
--- a/board/kup/kup4k/kup4k.c
+++ b/board/kup/kup4k/kup4k.c
@@ -24,6 +24,7 @@

 #include <common.h>
 #include <command.h>
+#include <libfdt.h>
 #include <mpc8xx.h>
 #include <hwconfig.h>
 #include <i2c.h>
@@ -291,3 +292,13 @@ static unsigned char swapbyte(unsigned char c)
 	}
 	return result;
 }
+
+/*
+ * Device Tree Support
+ */
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index ab708ae..14d412d 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -510,5 +510,9 @@
 #define CONFIG_SYS_DEVICE_NULLDEV	1       /* enble null device            */
 #define CONFIG_VERSION_VARIABLE		1

+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */

-- 
1.6.2.5

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 2/2 v3] 8xx, kup4: add FDT support

[Wolfgang Denk]

Dear Heiko Schocher,

In message <4C44C7DC.3010909@denx.de> you wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> 
> ---
> - changes since v1
>   - rebased against current mainline
>   - fix printf output
> 
> - changes since v2
>   added comments from Scott Wood
>   removed ft_blob_update() complete, because fixups are done in
>   cpu specific code.
> 
>  board/kup/kup4k/kup4k.c |   11 +++++++++++
>  include/configs/KUP4K.h |    4 ++++
>  2 files changed, 15 insertions(+), 0 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The number you have dialed is imaginary. Please divide by 0  and  try
again.