From mboxrd@z Thu Jan  1 00:00:00 1970
From: Felix Radensky <felix@embedded-sol.com>
Date: Thu, 12 Aug 2010 11:55:38 +0300
Subject: [U-Boot] BDI3000 configuration for AppliedMicro 460EX revB
In-Reply-To: <201008120909.23883.sr@denx.de>
References: <4C639ACC.9060005@embedded-sol.com> <201008120909.23883.sr@denx.de>
Message-ID: <4C63B70A.4090002@embedded-sol.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Stefan,

Stefan Roese wrote:
> Hi Felix,
>
> On Thursday 12 August 2010 08:55:08 Felix Radensky wrote:
>   
>> Can someone please share a BDI3000 configuration for u-boot/kernel
>> debugging on 460EX revB.
>>     
>
> The one I'm using on my Canyonlands attached. As always you need to change 
> your local settings (IP-addresses etc).
>
> Cheers,
> Stefan
>
>   
Thanks a lot. I'm used to almost completely removing [INIT] section for 
debugging.
That's how it worked on 405EX, but on 460EX it's apparently different.

Felix.