[U-Boot] [PATCH V2] Adds driver for Xilinx' xps_spi SPI controller.

[Graeme Smecher <graeme.smecher@mail.mcgill.ca>]

Hi Anatolij,

On 17/08/10 10:25 AM, Anatolij Gustschin wrote:
> Hi,
>
> On Tue, 17 Aug 2010 09:27:10 -0700
> Graeme Smecher<graeme.smecher@mail.mcgill.ca>  wrote:
>
>    
>> On 04/08/10 02:04 PM, Graeme Smecher wrote:
>>      
>>> This code differs in only trivial ways from the altera_spi driver. It plays
>>> nice with Thomas Chou's mmc_spi driver, as well as with SPI flash.
>>>
>>> Documentation for the SPI core is available here:
>>>
>>>      http://www.xilinx.com/support/documentation/ip_documentation/xps_spi.pdf
>>>
>>> Signed-off-by: Graeme Smecher<graeme.smecher@mail.mcgill.ca>
>>> ---
>>>    drivers/spi/Makefile     |    1 +
>>>    drivers/spi/xilinx_spi.c |  173 ++++++++++++++++++++++++++++++++++++++++++++++
>>>    2 files changed, 174 insertions(+), 0 deletions(-)
>>>    create mode 100644 drivers/spi/xilinx_spi.c
>>>
>>>        
>> Just a friendly reminder -- I'd be really happy to see this, and my
>> other patch (July 29, "Add support for Winbond W25Q64 SPI flash"),
>> integrated into the tree. Please let me know if there's anything I can
>> do to grease the skids.
>>      
> Thanks! But both, this and your other patch have been submitted when
> the merge window for next v2010.09 release was closed. So the patches
> probably won't be integrated before the next merge window opens,
> since these are not bug fixes. Normally you do not have to resubmit
> the patches when the next merge window opens again, maybe send a
> reminder again. Some info about release cycle can be found here [1].
>
> Best regards,
> Anatolij
>
> [1] http://www.denx.de/wiki/U-Boot/ReleaseCycle
>    

Ah, of course -- I should have guessed. I'll send along another prod 
next month if it's necessary.

thanks,
Graeme