From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Fri, 20 Aug 2010 12:20:25 +0200
Subject: [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and
 MX5
In-Reply-To: <201008201207.44578.david.jander@protonic.nl>
References: <1282292411-6087-1-git-send-email-sbabic@denx.de>
	<201008201129.25980.david.jander@protonic.nl>
	<4C6E525C.3090205@denx.de>
	<201008201207.44578.david.jander@protonic.nl>
Message-ID: <4C6E56E9.1050807@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

David Jander wrote:

> Great. I'll wait.
> In the meantime I have just done this to get it working:
> 
> #ifdef CONFIG_MX31
> void spi_cs_activate(struct spi_slave *slave)
> {
> 	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
> 	if (mxcs->gpio > 0)
> 		mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
> }
> 

Ok, but one goal I have is to get rid of nasty #ifdef CONFIG_MX*. I
introduce general gpio functions to make code more common, and I do not
want to fall back adding processor switches.

> Seems to work, but never mind...

Ok, I will resend my patch, I hope you can give a chance a test it on
your target.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================