[U-Boot] [PATCH] mvsata_ide: adjust port init sequence

[Albert ARIBAUD <albert.aribaud@free.fr>]

Le 06/09/2010 11:18, Sergei Shtylyov a ?crit :
> Hello.
>
> On 05.09.2010 23:33, Albert ARIBAUD wrote:
>
>>>> + /* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
>>>> control = readl(&port->scontrol);
>>>> control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
>>>> + /* Toggle control DET back to 0 (normal operation) */
>
>>> But you haven't set it to 1 yet. Maybe the comment is misplaced?
>
>> Look at the comment above, which said DET was set to 1, and at
>> MVSATA_PORT_INIT, which combines IPM=3 and DET=1.
>
> But you didn't write that value yet before your comment saying that
> you're resetting DET back to 0.

Yes, I did:

#define MVSATA_PORT_INIT \
	(MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)

MVSATA_PORT_INIT has both IPM = 3 (no low power allowed) and DET = 1 
(initialize).

Amicalement,
-- 
Albert.