From: Sergei Shtylyov <sshtylyov@mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] DockStar: LED support
Date: Wed, 08 Sep 2010 14:24:47 +0400 [thread overview]
Message-ID: <4C87646F.4020008@mvista.com> (raw)
In-Reply-To: <1283869696-10077-6-git-send-email-ecc@cmu.edu>
Hello.
On 07-09-2010 18:28, Eric Cooper wrote:
> derived from patches posted by Jeff Doozan
> in the uBoot forum at http://forum.doozan.com
> Signed-off-by: Eric Cooper<ecc@cmu.edu>
[...]
> diff --git a/board/Marvell/dockstar/dockstar.c b/board/Marvell/dockstar/dockstar.c
> index 13cd347..7788837 100644
> --- a/board/Marvell/dockstar/dockstar.c
> +++ b/board/Marvell/dockstar/dockstar.c
> @@ -153,3 +153,33 @@ void reset_phy(void)
> printf("88E1116 Initialized on %s\n", name);
> }
> #endif /* CONFIG_RESET_PHY_R */
> +
> +#define GREEN_LED (1<< 14)
> +#define ORANGE_LED (1<< 15)
> +#define BOTH_LEDS (GREEN_LED | ORANGE_LED)
> +#define NEITHER_LED 0
> +
> +static void set_leds(u32 leds, u32 blinking)
> +{
> + struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
> + u32 oe = readl(&r->oe) | BOTH_LEDS;
> + writel(oe& ~leds,&r->oe); /* active low */
> + u32 bl = readl(&r->blink_en)& ~BOTH_LEDS;
> + writel(bl | blinking,&r->blink_en);
> +}
> +
> +void show_boot_progress(int val)
> +{
> + switch (val) {
> + case 15: /* booting Linux */
*case* should be aligned with *switch*. Don't align using spaces.
> + set_leds(BOTH_LEDS, NEITHER_LED);
> + break;
> + case 64: /* Ethernet initialization */
> + set_leds(GREEN_LED, GREEN_LED);
> + break;
> + default:
> + if (val < 0) /* error */
> + set_leds(ORANGE_LED, ORANGE_LED);
> + break;
> + }
> +}
WBR, Sergei
next prev parent reply other threads:[~2010-09-08 10:24 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-07 14:28 [U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar Eric Cooper
2010-09-07 14:28 ` [U-Boot] [PATCH 1/5] add DOCKSTAR machine type Eric Cooper
2010-09-07 15:07 ` Wolfgang Denk
2010-09-07 14:28 ` [U-Boot] [PATCH 2/5] DockStar: board support (derived from sheevaplug) Eric Cooper
2010-09-07 15:11 ` Wolfgang Denk
[not found] ` <20100908010601.GG8903@localhost>
2010-09-08 10:19 ` Wolfgang Denk
2010-09-07 14:28 ` [U-Boot] [PATCH 3/5] DockStar: change RAM definitions to one bank (128 MB) Eric Cooper
2010-09-07 15:12 ` Wolfgang Denk
2010-09-07 14:28 ` [U-Boot] [PATCH 4/5] DockStar: config Eric Cooper
2010-09-07 15:52 ` Wolfgang Denk
2010-09-07 14:28 ` [U-Boot] [PATCH 5/5] DockStar: LED support Eric Cooper
2010-09-07 15:53 ` Wolfgang Denk
2010-09-08 10:24 ` Sergei Shtylyov [this message]
2010-09-27 9:07 ` [U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar Thomas Weber
2010-09-27 9:36 ` [U-Boot] How to debug u-boot with GDB & BDI3000 sywang
2010-09-27 10:08 ` Wolfgang Denk
2010-09-28 4:20 ` sywang
2010-09-27 11:03 ` [U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar Eric Cooper
2010-10-20 14:54 ` [U-Boot] [PATCH v2] Seagate FreeAgent DockStar support Eric Cooper
2010-10-21 4:52 ` Prafulla Wadaskar
2010-10-21 15:01 ` Eric Cooper
2010-10-21 15:07 ` Wolfgang Denk
2010-10-21 6:17 ` Wolfgang Denk
2010-10-21 6:26 ` Prafulla Wadaskar
2010-10-21 6:35 ` Wolfgang Denk
2010-10-21 6:38 ` [U-Boot] [RFC] [PATCH] kirkwood: get rid of config.mk files Wolfgang Denk
2010-10-21 7:43 ` Prafulla Wadaskar
2010-10-21 8:21 ` Wolfgang Denk
2010-10-21 8:37 ` Prafulla Wadaskar
2010-10-21 9:34 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C87646F.4020008@mvista.com \
--to=sshtylyov@mvista.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox