From: Reinhard Meyer <u-boot@emk-elektronik.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] ARM relocation, probably trivial mistake - back to original problem
Date: Fri, 01 Oct 2010 16:55:33 +0200 [thread overview]
Message-ID: <4CA5F665.9010700@emk-elektronik.de> (raw)
In-Reply-To: <20101001125502.D0B4E1539A0@gemini.denx.de>
Dear Wolfgang Denk,
>> The environment issues still persist. I am at a loss
>> there now.
>>
>> Observation: the old style commands "setenv", "printenv", etc.
>> work, but any "env" command except for "env" alone crashes.
>
> OK. If "printenv" works and "env print" fails then it has nothing to
> do with the environment code itself, as both call the same function.
>
> It must have something to do with the implementation of subcommands
> then. See do_env() in "common/cmd_nvedit.c"; check if the command
> table address for find_cmd_tbl() is OK.
>
> Eventually other commands with subcommands fail as well (i2c ?) ?
Nope, other commands with subcommands work fine. I did not test ALL
but mmc, i2c, nand behave normally.
I suspect something to do with a 256k boundary maybe, u-boot.bin is
short of 256k. I changed the initial bootstrap to load 496k
yesterday (before that the unrelocated version did fail in some
commands).
I'll keep investigating.
But the bad CRC issue must be something unrelated, or maybe not?
Best Regards,
Reinhard
next prev parent reply other threads:[~2010-10-01 14:55 UTC|newest]
Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-30 13:57 [U-Boot] ARM relocation, probably trivial mistake Reinhard Meyer
2010-09-30 14:08 ` Stefano Babic
2010-09-30 14:20 ` Reinhard Meyer
2010-09-30 15:39 ` Heiko Schocher
2010-09-30 16:06 ` Reinhard Meyer
2010-09-30 15:38 ` Heiko Schocher
2010-09-30 17:43 ` Wolfgang Denk
2010-10-01 5:25 ` Heiko Schocher
2010-10-01 5:40 ` Albert ARIBAUD
2010-10-01 5:53 ` Heiko Schocher
2010-10-01 6:39 ` Reinhard Meyer
2010-10-01 6:57 ` Heiko Schocher
2010-10-01 8:45 ` Wolfgang Denk
2010-10-01 7:01 ` Albert ARIBAUD
2010-10-01 7:42 ` [U-Boot] ARM relocation, probably trivial mistake - back to original problem Reinhard Meyer
2010-10-01 8:27 ` Heiko Schocher
2010-10-01 10:44 ` Reinhard Meyer
2010-10-01 10:55 ` Wolfgang Denk
2010-10-01 11:03 ` Reinhard Meyer
2010-10-01 11:21 ` Wolfgang Denk
2010-10-01 11:37 ` Reinhard Meyer
2010-10-01 11:59 ` Wolfgang Denk
2010-10-01 12:22 ` Reinhard Meyer
2010-10-01 12:47 ` Reinhard Meyer
2010-10-01 12:55 ` Wolfgang Denk
2010-10-01 14:55 ` Reinhard Meyer [this message]
2010-10-02 8:53 ` Heiko Schocher
2010-10-01 15:47 ` Steve Sakoman
2010-10-02 7:15 ` [U-Boot] ARM relocation, question to Heiko Reinhard Meyer
[not found] ` <4CA6E517.9040701@fr<1286167382.22760.19.camel@ptyser-laptop>
2010-10-02 7:53 ` Albert ARIBAUD
2010-10-02 8:10 ` Reinhard Meyer
2010-10-02 8:26 ` Albert ARIBAUD
2010-10-03 18:04 ` Wolfgang Denk
2010-10-02 9:08 ` Heiko Schocher
2010-10-02 9:29 ` Albert ARIBAUD
2010-10-03 18:05 ` Wolfgang Denk
2010-10-02 10:17 ` Joakim Tjernlund
2010-10-02 16:21 ` J. William Campbell
2010-10-02 18:33 ` Reinhard Meyer
2010-10-03 18:22 ` Wolfgang Denk
2010-10-02 20:39 ` Reinhard Meyer
2010-10-02 21:09 ` Albert ARIBAUD
2010-10-02 23:07 ` Graeme Russ
2010-10-03 7:10 ` Albert ARIBAUD
2010-10-03 8:44 ` Graeme Russ
2010-10-03 8:58 ` Albert ARIBAUD
2010-10-03 15:36 ` J. William Campbell
2010-10-03 16:47 ` Albert ARIBAUD
2010-10-03 17:54 ` Albert ARIBAUD
2010-10-03 18:43 ` Wolfgang Denk
2010-10-04 5:41 ` Heiko Schocher
2010-10-03 18:29 ` Wolfgang Denk
2010-10-03 19:26 ` J. William Campbell
2010-10-04 5:52 ` Heiko Schocher
2010-10-03 18:14 ` Wolfgang Denk
2010-10-03 18:54 ` J. William Campbell
2010-10-03 19:52 ` Albert ARIBAUD
2010-10-03 18:03 ` Wolfgang Denk
2010-10-03 18:34 ` Albert ARIBAUD
2010-10-03 18:45 ` Wolfgang Denk
2010-10-04 6:08 ` Heiko Schocher
2010-10-04 6:40 ` Albert ARIBAUD
2010-10-04 7:27 ` Reinhard Meyer
2010-10-04 8:28 ` Albert ARIBAUD
2010-10-04 8:57 ` Heiko Schocher
2010-10-04 9:27 ` Albert ARIBAUD
2010-10-04 10:01 ` Joakim Tjernlund
2010-10-04 9:58 ` Graeme Russ
2010-10-04 14:17 ` Albert ARIBAUD
2010-10-04 14:25 ` Rogan Dawes
2010-10-04 15:24 ` Albert ARIBAUD
2010-10-04 16:31 ` Stefan Roese
2010-10-04 21:31 ` Albert ARIBAUD
2010-10-04 7:44 ` Albert ARIBAUD
2010-10-04 4:43 ` Peter Tyser
2010-10-04 6:08 ` Wolfgang Denk
2010-10-04 7:36 ` Joakim Tjernlund
2010-10-04 8:08 ` Albert ARIBAUD
2010-10-04 8:28 ` Joakim Tjernlund
2010-10-04 8:33 ` Albert ARIBAUD
[not found] ` <OF05779DA1.EF3C4954-ONC12577B2.00307A0D-C12577B2.0030B9C0@tran <4CAA1613.80002@comcast.net>
2010-10-04 8:52 ` Joakim Tjernlund
2010-10-04 9:10 ` Albert ARIBAUD
2010-10-04 10:13 ` Wolfgang Denk
2010-10-04 15:28 ` J. William Campbell
2010-10-04 15:52 ` Albert ARIBAUD
2010-10-04 17:06 ` Wolfgang Denk
2010-10-04 17:59 ` J. William Campbell
2010-10-04 18:43 ` Joakim Tjernlund
2010-10-04 21:10 ` Wolfgang Denk
2010-10-05 7:26 ` Joakim Tjernlund
2010-10-04 17:04 ` Graeme Russ
2010-10-04 17:14 ` Wolfgang Denk
2010-10-04 8:27 ` Wolfgang Denk
2010-10-02 8:49 ` [U-Boot] ARM relocation, probably trivial mistake - back to original problem Heiko Schocher
2010-10-01 12:49 ` Wolfgang Denk
2010-10-01 14:48 ` Reinhard Meyer
2010-10-04 7:44 ` [U-Boot] AT91 clock and timer cleanups (was: ARM relocation, probably trivial mistake - back to original problem) Reinhard Meyer
2010-10-04 8:32 ` Wolfgang Denk
2010-10-04 8:42 ` [U-Boot] AT91 clock and timer cleanups Reinhard Meyer
2010-10-04 8:49 ` Wolfgang Denk
2010-10-04 8:52 ` Reinhard Meyer
2010-10-04 9:03 ` Wolfgang Denk
2010-10-04 9:12 ` Reinhard Meyer
2010-10-04 14:58 ` Reinhard Meyer
2010-10-04 17:00 ` Wolfgang Denk
2010-10-04 17:15 ` Reinhard Meyer
2010-10-04 17:32 ` Wolfgang Denk
2010-10-04 19:22 ` Reinhard Meyer
2010-10-01 8:48 ` [U-Boot] ARM relocation, probably trivial mistake - back to original problem Wolfgang Denk
2010-10-01 9:50 ` Reinhard Meyer
2010-10-01 8:03 ` [U-Boot] ARM relocation, probably trivial mistake Wolfgang Denk
2010-10-01 7:51 ` Wolfgang Denk
2010-10-01 8:28 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CA5F665.9010700@emk-elektronik.de \
--to=u-boot@emk-elektronik.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox